Purity of MoO3 from different manufacturers
- 作者: Khomyakov A.V.1, Mozhevitina E.N.1, Sadovskii A.P.1, Sukharev V.A.1, Avetissov I.C.1
-
隶属关系:
- Mendeleev University of Chemical Technology
- 期: 卷 52, 编号 3 (2016)
- 页面: 285-293
- 栏目: Article
- URL: https://journals.rcsi.science/0020-1685/article/view/157387
- DOI: https://doi.org/10.1134/S0020168516030055
- ID: 157387
如何引用文章
详细
Inductively coupled plasma mass spectrometry with the use of a reaction cell in collision mode has been used to determine the concentrations of 68 elemental impurities in six commercially available molybdenum( VI) oxide reagents. The results indicate that the purity of the reagents is not better than 3N (99.9 wt %). A major impurity in the MoO3 samples is tungsten. Its concentration ranges from 5 × 10–3 to 6 × 10–2 wt %, depending on the manufacturer.
作者简介
A. Khomyakov
Mendeleev University of Chemical Technology
Email: aich@rctu.ru
俄罗斯联邦, Miusskaya pl. 9, Moscow, 125047
E. Mozhevitina
Mendeleev University of Chemical Technology
Email: aich@rctu.ru
俄罗斯联邦, Miusskaya pl. 9, Moscow, 125047
A. Sadovskii
Mendeleev University of Chemical Technology
Email: aich@rctu.ru
俄罗斯联邦, Miusskaya pl. 9, Moscow, 125047
V. Sukharev
Mendeleev University of Chemical Technology
Email: aich@rctu.ru
俄罗斯联邦, Miusskaya pl. 9, Moscow, 125047
I. Avetissov
Mendeleev University of Chemical Technology
编辑信件的主要联系方式.
Email: aich@rctu.ru
俄罗斯联邦, Miusskaya pl. 9, Moscow, 125047
补充文件
