MACROSCOPIC DEFECTS AFTER FRICTION STIR WELDING IN THE WELD JOINT OF THE Al–Mg SYSTEM ALLOY

Nataliya V. Kazantseva; Казанцева Наталия Васильевна; Vladimir A. Bychenok; Быченок Владимир Анатольевич; Vladimir E. Prohorovich; Прохорович Владимир Евгеньевич; Gennadii V. Schapov; Щапов Геннадий Валерьевич; Yuliya N. Koemets; Коэмец Юлия Николаевна; Igor V. Ezhov; Ежов Игорь Вячеславович; Denis I. Davydov; Давыдов Денис Игоревич

doi:10.31857/S0015323025070081

MACROSCOPIC DEFECTS AFTER FRICTION STIR WELDING IN THE WELD JOINT OF THE Al–Mg SYSTEM ALLOY

Authors: Kazantseva N.V.¹, Bychenok V.A.², Prohorovich V.E.², Schapov G.V.¹, Koemets Y.N.¹, Ezhov I.V.¹, Davydov D.I.¹
Affiliations:
1. Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences
2. ITMO University
Issue: Vol 126, No 7 (2025)
Pages: 803-816
Section: СТРУКТУРА, ФАЗОВЫЕ ПРЕВРАЩЕНИЯ И ДИФФУЗИЯ
URL: https://journals.rcsi.science/0015-3230/article/view/296831
DOI: https://doi.org/10.31857/S0015323025070081
ID: 296831

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The structure and phase composition of the lap joint of aluminum alloy AMg6 obtained by friction stir welding are studied. The formation of complex macroscopic defects in the welded joint is detected. The conditions for the formation of macroscopic defects in aluminum joints obtained by friction stir welding and methods for preventing the formation of defects are discussed.