Открытый доступ Открытый доступ  Доступ закрыт Доступ предоставлен  Доступ закрыт Только для подписчиков

Том 471, № 1 (2016)

Physical Chemistry

Thermodynamics of oxygen solutions in titanium-containing Fe–Co melts

Aleksandrov A., Dashevskii V., Leont’ev L.

Аннотация

Performed for the first time, the thermodynamic analysis of oxygen solutions in titanium-containing Fe–Co melts showed that the deoxidizing power of titanium with increasing cobalt content of the melt first decreases, reaches a minimum at a cobalt content of 20%, and then increases. The titanium contents [%Ti]* at equilibrium points between the oxide phases TiO2, Ti3O5, and Ti2O3 were determined. The curves of the oxygen solubility in titanium-containing iron–cobalt melts pass through a minimum, which shifts toward lower titanium contents with increasing cobalt content of the melt. Further alloying with titanium leads to an increase in the oxygen concentration of the melt so that the higher cobalt content of the melt, the steeper the increase in the oxygen content after the minimum as titanium is added to the melt.

Doklady Physical Chemistry. 2016;471(1):173-177
pages 173-177 views

Electrochemical evaluation of the viability of platelets

Khvatov V., Borovkova N., Evseev A., Goldin M., Tsivadze A., Khubutiya M., Goroncharovskaya I., Andreev V., Makarov M.

Аннотация

The difference between the open-circuit redox potentials of a platinum electrode measured in blood plasma before and after the cryolysis of platelets depends linearly on the content of granule-rich platelets in the plasma. This phenomenon can be used to determine the viability of platelets.

Doklady Physical Chemistry. 2016;471(1):178-180
pages 178-180 views

Electrochemical synthesis of cobalt polyporphine films

Istakova O., Konev D., Devillers C., Vorotyntsev M., Zyubin A., Antipov E., Aldoshin S.

Аннотация

A method for modification of the inert electrode surface with an electroactive polymeric film containing the CoN4 catalytic site has been suggested and approved. The described approach affords the maximal content of the metal porphine moiety per unit weight of the coating. The classical method of introduction of an ion into the porphine macrocycle has been replaced by electrochemical polarization of an electrode with a metallated film in a dilute solution. The metalation efficiency has been demonstrated by the presence of changes in the current–voltage and spectral characteristics of the resulting polymeric films of the unsubstituted porphine pH2P and cobalt polyporphine pCoP.

Doklady Physical Chemistry. 2016;471(1):181-184
pages 181-184 views

Generalization of the Nernst layer model to take into account the difference in diffusivity between the components of the system in bromate reduction in steady-state one-dimensional mode: Current limiting by proton transport

Antipov A., Vorotyntsev M., Tolmachev Y., Antipov E., Aldoshin S.

Аннотация

The reduction of nonelectroactive bromate anion BrO3- from acidic solutions while limiting the maximum current by diffusion transport of protons was studied by methods of numerical integration of transport equations. The calculation was performed based on a generalization of the Nernst steady diffusion layer model, in which the choice of the layer thickness for each component of the system is made using the Levich formula and takes into account the difference in diffusivity between the components. This difference in layer thickness was shown to have a significant effect on the main characteristics of the system, such as the maximum possible discharge current, and also the concentration profiles of the components.

Doklady Physical Chemistry. 2016;471(1):185-189
pages 185-189 views

Structure formation of sulfonated polyphenylquinoxalines in solution and in the solid state

Bulycheva E., Belomoina N., Vasiliev V., Elmanovich I., Wasserman L., Hsu S., Cheng P.

Аннотация

Sulfonated polyphenylquinoxalines with different content of sulfo groups have been synthesized by polymer analogous reactions under different conditions. The rheological properties of these polymers in Nmethylpyrrolidone have been studied. The mechanical properties of films based on sulfonated polyphenylquinoxalines under uniaxial tension have been measured. The structures of the polymers have been examined by AFM.

Doklady Physical Chemistry. 2016;471(1):190-193
pages 190-193 views

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».