Dephosphorization of manganese-containing oxide melts
- Authors: Dashevskii V.Y.1, Makeev D.B.1, Polulyakh L.A.1, Aleksandrov A.A.1, Leont’ev L.I.1
-
Affiliations:
- Baikov Institute of Metallurgy and Materials Science
- Issue: Vol 473, No 2 (2017)
- Pages: 55-57
- Section: Physical Chemistry
- URL: https://journals.rcsi.science/0012-5016/article/view/153623
- DOI: https://doi.org/10.1134/S0012501617040017
- ID: 153623
Cite item
Abstract
A process for dephosphorization of manganese-containing oxide melts with carbon monoxide was developed and studied for the first time. Thermodynamic analysis showed that, under equilibrium conditions, the reaction of carbon monoxide CO with phosphorus oxide P2O5 contained in a manganese-containing oxide melt does not occur. However, since both of the products of this reaction are gaseous, the reaction may occur if the reaction products are removed from the reaction zone. The dephosphorization of manganese concentrate while blowing carbon monoxide through the molten concentrate was experimentally investigated. The blowing significantly reduced the phosphorus content of the melt: the P: Mn ratio decreased by a factor of 5–10, and the degree of dephosphorization was 70–90%.
About the authors
V. Ya. Dashevskii
Baikov Institute of Metallurgy and Materials Science
Author for correspondence.
Email: vdashev@imet.ac.ru
Russian Federation, Moscow, 119334
D. B. Makeev
Baikov Institute of Metallurgy and Materials Science
Email: vdashev@imet.ac.ru
Russian Federation, Moscow, 119334
L. A. Polulyakh
Baikov Institute of Metallurgy and Materials Science
Email: vdashev@imet.ac.ru
Russian Federation, Moscow, 119334
A. A. Aleksandrov
Baikov Institute of Metallurgy and Materials Science
Email: vdashev@imet.ac.ru
Russian Federation, Moscow, 119334
L. I. Leont’ev
Baikov Institute of Metallurgy and Materials Science
Email: vdashev@imet.ac.ru
Russian Federation, Moscow, 119334
Supplementary files
