Dephosphorization of manganese-containing oxide melts


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

A process for dephosphorization of manganese-containing oxide melts with carbon monoxide was developed and studied for the first time. Thermodynamic analysis showed that, under equilibrium conditions, the reaction of carbon monoxide CO with phosphorus oxide P2O5 contained in a manganese-containing oxide melt does not occur. However, since both of the products of this reaction are gaseous, the reaction may occur if the reaction products are removed from the reaction zone. The dephosphorization of manganese concentrate while blowing carbon monoxide through the molten concentrate was experimentally investigated. The blowing significantly reduced the phosphorus content of the melt: the P: Mn ratio decreased by a factor of 5–10, and the degree of dephosphorization was 70–90%.

Авторлар туралы

V. Dashevskii

Baikov Institute of Metallurgy and Materials Science

Хат алмасуға жауапты Автор.
Email: vdashev@imet.ac.ru
Ресей, Moscow, 119334

D. Makeev

Baikov Institute of Metallurgy and Materials Science

Email: vdashev@imet.ac.ru
Ресей, Moscow, 119334

L. Polulyakh

Baikov Institute of Metallurgy and Materials Science

Email: vdashev@imet.ac.ru
Ресей, Moscow, 119334

A. Aleksandrov

Baikov Institute of Metallurgy and Materials Science

Email: vdashev@imet.ac.ru
Ресей, Moscow, 119334

L. Leont’ev

Baikov Institute of Metallurgy and Materials Science

Email: vdashev@imet.ac.ru
Ресей, Moscow, 119334

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Pleiades Publishing, Ltd., 2017