Influence of Various Factors on the Wear Process of Electrolytic Nickel-Phosphorus Coatings
- Авторы: Aslanyan I.1, Emaev I.2, Shuster L.2
-
Учреждения:
- Engineering Center JSC “United Engine Corporation,”
- Ufa State Aviation Technical University
- Выпуск: Том 55, № 7-8 (2019)
- Страницы: 663-668
- Раздел: Materials Science. Corrosion Protection
- URL: https://journals.rcsi.science/0009-2355/article/view/236661
- DOI: https://doi.org/10.1007/s10556-019-00676-9
- ID: 236661
Цитировать
Аннотация
The influence of SiC additives and annealing on the wear of electrolytic nickel-phosphorus coatings under different friction conditions (sliding, fretting wear, and fretting corrosion) was studied. It was found that wear of coatings due to sliding friction is much lower than due to fretting wear and fretting corrosion. It is shown that in most of the considered friction conditions the least wear is provided by the heattreated nickel-phosphorus coating without SiC additives.
Ключевые слова
Об авторах
I. Aslanyan
Engineering Center JSC “United Engine Corporation,”
Автор, ответственный за переписку.
Email: as-irina@rambler.ru
Россия, Moscow
I. Emaev
Ufa State Aviation Technical University
Email: as-irina@rambler.ru
Россия, Ufa
L. Shuster
Ufa State Aviation Technical University
Email: as-irina@rambler.ru
Россия, Ufa