Мақаланы E-mail арқылы жіберу Influence of Various Factors on the Wear Process of Electrolytic Nickel-Phosphorus Coatings
- Авторлар: Aslanyan I.1, Emaev I.2, Shuster L.2
-
Мекемелер:
- Engineering Center JSC “United Engine Corporation,”
- Ufa State Aviation Technical University
- Шығарылым: Том 55, № 7-8 (2019)
- Беттер: 663-668
- Бөлім: Materials Science. Corrosion Protection
- URL: https://journals.rcsi.science/0009-2355/article/view/236661
- DOI: https://doi.org/10.1007/s10556-019-00676-9
- ID: 236661
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The influence of SiC additives and annealing on the wear of electrolytic nickel-phosphorus coatings under different friction conditions (sliding, fretting wear, and fretting corrosion) was studied. It was found that wear of coatings due to sliding friction is much lower than due to fretting wear and fretting corrosion. It is shown that in most of the considered friction conditions the least wear is provided by the heattreated nickel-phosphorus coating without SiC additives.
Негізгі сөздер
Авторлар туралы
I. Aslanyan
Engineering Center JSC “United Engine Corporation,”
Хат алмасуға жауапты Автор.
Email: as-irina@rambler.ru
Ресей, Moscow
I. Emaev
Ufa State Aviation Technical University
Email: as-irina@rambler.ru
Ресей, Ufa
L. Shuster
Ufa State Aviation Technical University
Email: as-irina@rambler.ru
Ресей, Ufa
