Investigation and a Technique for Calculating the Mode of Deformation of the Bayonet Catch of the Steam Chamber of a Bpm-100 Automatic Line
- Autores: Kochetov V.1, Lazarev S.2, Baronin G.2
-
Afiliações:
- Research Institute of Rubber Machinery (NIIRTMash)
- Tambov State Technical University
- Edição: Volume 52, Nº 7-8 (2016)
- Páginas: 441-451
- Seção: Research, Design, Calculations, and Operating Experience
- URL: https://journals.rcsi.science/0009-2355/article/view/234845
- DOI: https://doi.org/10.1007/s10556-016-0212-7
- ID: 234845
Citar
Resumo
A computational procedure and technique for computing the strength and tension of a bayonet catch (represented as a thin short cylindrical shell, with a ring on one edge of the shell and teeth along the other edge) loaded on the side of the teeth with a regular load are proposed. It is shown that with this type of loading, the stresses and displacements differ significantly from the computed values obtained in axisymmetric loading.
Palavras-chave
Sobre autores
V. Kochetov
Research Institute of Rubber Machinery (NIIRTMash)
Email: geometry@mail.nnn.tstu.ru
Rússia, Tambov
S. Lazarev
Tambov State Technical University
Autor responsável pela correspondência
Email: geometry@mail.nnn.tstu.ru
Rússia, Tambov
G. Baronin
Tambov State Technical University
Email: geometry@mail.nnn.tstu.ru
Rússia, Tambov