Production and Characteristics of (ZnSe)0.1(SnSe)0.9 Films for Use in Thin Film Solar Cells

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

(ZnSe)x(SnSe)1–x films have been produced using chemical molecular beam deposition (CMBD) from an ZnSe and SnSe compound with a stoichiometric composition at a substrate temperature of 500°С. The structural, morphological, and electrophysical properties of (ZnSe)0.1 (SnSe)0.9 films are studied. The size of film grains is 5–6 μm. The results of X-ray diffraction analysis of specimens have revealed that the films have a crystalline (orthorhombic) structure. The structural parameters of the produced films are presented. The electrical conductivity of the films measured using the Van der Pauw method varies within 15–0.6 Ω cm–1.

作者简介

T. Razykov

Physical-Technical Institute

Email: k.kuchkarov@mail.ru
乌兹别克斯坦, Tashkent, 100084

B. Ergashev

Physical-Technical Institute

Email: k.kuchkarov@mail.ru
乌兹别克斯坦, Tashkent, 100084

R. Yuldoshov

Physical-Technical Institute

Email: k.kuchkarov@mail.ru
乌兹别克斯坦, Tashkent, 100084

A. Mavlonov

Physical-Technical Institute

Email: k.kuchkarov@mail.ru
乌兹别克斯坦, Tashkent, 100084

K. Kuchkarov

Physical-Technical Institute

编辑信件的主要联系方式.
Email: k.kuchkarov@mail.ru
乌兹别克斯坦, Tashkent, 100084

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2018