Device for obtaining mesh skin flaps
- Authors: Izmailov G.A.1, Garaev R.R.1, Sadykova L.M.1
-
Affiliations:
- Kurashov Kazan Order of the Red Banner of Labor Medical Institute
- Issue: Vol 70, No 6 (1989)
- Pages: 466-467
- Section: Articles
- URL: https://journals.rcsi.science/kazanmedj/article/view/101760
- DOI: https://doi.org/10.17816/kazmj101760
- ID: 101760
Cite item
Full Text
Abstract
When repairing skin with extensive skin defects, devices are usually used to obtain mesh grafts from skin flaps with different expansion coefficients. They consist of a cutting element, a supporting roller and a plate. As a cutting element they use special interchangeable knives, a roller with a continuous thread or safety razor blades installed in large numbers (from 50 to 250) perpendicularly to the axis of the rotating roller or to the supporting plate. The main disadvantage of these devices is the difficulty of blanking and changing the cutting elements, which is dangerous and requires not only considerable time, but also a certain qualification of medical personnel.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
G. A. Izmailov
Kurashov Kazan Order of the Red Banner of Labor Medical Institute
Author for correspondence.
Email: info@eco-vector.com
Russian Federation, Kazan
R. R. Garaev
Kurashov Kazan Order of the Red Banner of Labor Medical Institute
Email: info@eco-vector.com
Russian Federation, Kazan
L. M. Sadykova
Kurashov Kazan Order of the Red Banner of Labor Medical Institute
Email: info@eco-vector.com
Russian Federation, Kazan