An optimal technological scheme for flotation concentration of gold-copper-arsenic ores of the Taror deposit (Republic of Tajikistan)

This article investigates the effect of material size on the efficiency of flotation concentration of gold-copperarsenic ores of the Taror deposit (Republic of Tajikistan) and studies the dependence of gold recovery on the duration of the process with the purpose of developing an alternative technological scheme for processing this ore type. According to X-ray phase analysis, Taror ore samples consist of rock-forming minerals by 92%. Ore mineralization is represented by sulphide minerals, mainly arsenopyrite, chalcopyrite and pyrite, in the total amount of 8%. Ore-forming elements include iron, sulphur, arsenic and copper with the mass fraction of 6.02%, 3.26%, 1.52% and 0.82%, respectively. Gold and silver are contained in the ore in the amount of 7.35 g/t and 20.28 g/t, respectively. The oxidation state of the ore calculated by iron comprises 51.3%. According to this indicator, this ore type can be distinguished as mixed, close to the primary type. According to the conducted chemical phase analysis of gold, this ore type belongs to the category of refractory ores. Flotation concentration experiments showed that grinding the original ore to a size of 95%–71 microns increases the recovery of gold in the concentrate by 10%, compared to grinding to a particle size of 80%–71 microns. The effect of the flotation process duration on gold recovery was also studied. To achieve the maximum gold recovery in the flotation concentrate, the duration of the main flotation and control flotation should be taken equal to 14 and 12 minutes, respectively. As a result of the experiments, a relatively simple technological solution was proposed for flotation concentration of the Taror ore, which includes the main, control and cleaning stages of flotation.

Taror deposit, refractory gold-bearing ores, gold, flotation, flotation concentration, ore mineralization