Email this article Research methodology for urban vehicle driving cycles
- Authors: Manyashin A.V.1
-
Affiliations:
- Industrial University of Tyumen
- Issue: No 4 (2021)
- Pages: 67-73
- Section: TRANSPORT
- URL: https://journals.rcsi.science/2782-232X/article/view/317462
- DOI: https://doi.org/10.31660/2782-232X-2021-4-67-73
- ID: 317462
Cite item
Full Text
Abstract
Driving cycles are represented, as a rule, the dependence of speed on the current time, and they are widely used to assess the operational characteristics of road transport, in particular, the fuel efficiency of newly produced and already operated vehicles, as well as their environmental friendliness. Fuel consumption in the urban and mixed cycles is the most important characteristic of the car. This indicator gives an objective assessment of the vehicle's efficiency, but provided that the reference cycle used in its determination corresponds to the real operating conditions. The article considers the problem of determining the characteristics of a typical driving cycle based on the real speed profiles of vehicles obtained as a result of GNSS (Global Navigation Satellite Systems) monitoring.
References
Маняшин, А. В. Моделирование расхода топлива автомобилями на базе типичных ездовых циклов / А. В. Маняшин, С. А. Маняшин. – Тюмень : Тюменский индустриальный университет, 2014 – 124 с. – Текст : непосредственный. Federal Test Procedure Review Project. Status Report : approved United States Environmental Protection Agency, February, 1993, 420-R-93-006 / Direct text. – Washington : Office of Air and Radiation, 1993. – 21 p. Development of a driving cycle for Brasov city / D. Covaciu, I. Preda, D. Florea, C. Vasile. – Direct text // International Conference of Mechanical Engineering ICOME, October, 2010. – Craiova : Universitaria Publishing House, 2010. – T. II. – Pp. 761–766. Tzirakis, E. Development of processing methodologies used to form complete driving-cycle dynamometer tests based on urban on-road driving and road gradient data / E. Tzirakis, F. Zannikos. – doi: 10.1177/0954407014529940. – Direct text // Proceedings of the Institution of Mechanical Engineers, Part D. Journal of Automobile Engineering. – 2015. – 229 (1). – Pp. 97–110. Anida, I. N. Driving cycle development for Kuala Terengganu city using k-means method / I. N. Anida, S. A. Rahman. – doi: 10.11591/ijece.v9i3.pp1780-1787. – Direct text // International Journal of Electrical and Computer Engineering. – 2019. – 9 (3). – Pp. 1780–1787. André, M. Real-world driving cycles for measuring cars pollutant emissions – Part B : Driving cycles according to vehicle power : Report INRETS-LTE / M. André. Madrid : Cedex, 2004. – 93 p. – Direct text. Development of Urban Driving Cycle with GPS Data Post Processing / P. Lipar, I. Strnad, M. Česnik, T. Maher. – doi: 10.7307/ptt.v28i4.1916. – Direct text // Promet–Traffic&Transportation. – 2016. – Vol. 28, No. 4. – Pp. 353–364. Driving Cycle for Motorcycle Using Micro-Simulation Model / R. Kumar, B. Durai, P. Parida. – doi: 10.4236/jep.2012.329144. – Direct text // Journal of Environmental Protection. – 2012. – 3 (9A). – Pp. 1268– 1273. The Worldwide Harmonised Light Vehicle Test Procedure (WLTP) / Vehicle Certification Agency :. – URL : https://www.vehicle-certification-agency.gov.uk/fcb/wltp.asp. – Electronic text (дата обращения : 09.11.2021). Маняшин, А. В. Использование Stamm 3.0 при решении научных и инженерно-технических задач : монография / А. В. Маняшин. – Тюмень : Тюменский индустриальный университет, 2017. – 191 с. – Текст : непосредственный. Маняшин, А. В. Статистический анализ данных и имитационное моделирование в системе Stamm 4.0 / А. В. Маняшин. – Тюмень : Тюменский индустриальный университет, 2020. – 220 с. – Текст : непосредственный.
Supplementary files
