Issue |
Title |
File |
Vol 22, No 3 (2023) |
Abrasive flow machining of specimens of cast billets from austenomartensitic steel with high-viscosity media |
(Rus)
|
Levko V.A., Teryaev N.S., Litovka O.V., Ivanov P.A.
|
Vol 22, No 3 (2023) |
Approximation of forces of fluid film bearing lubricating layer using machine learning methods |
(Rus)
|
Kazakov Y.N., Stebakov I.N., Shutin D.V., Savin L.A.
|
Vol 22, No 3 (2023) |
Assessment of the possibility of shortening the landing distance of maneuverable aircraft |
(Rus)
|
Strelets M.Y., Tarasov A.Z., Grishin I.A.
|
Vol 22, No 3 (2023) |
Bench tests of an electric engine-propeller group, as the first stage in the creation of a hybrid power plant |
(Rus)
|
Sychev A.V., Ravikovich Y.A., Borisov D.A.
|
Vol 22, No 3 (2023) |
Classification and comparative analysis of methods for limiting technogenic pollution in the near-Earth space |
(Rus)
|
Klyushnikov V.Y., Zakharova A.P., Usovik I.V.
|
Vol 22, No 3 (2023) |
Comparison of quasi-three-dimensional and full three-dimensional formulations of thrust bearing operation |
(Rus)
|
Sokolov N.V., Khadiev M.B., Fedotov P.E., Fedotov E.M.
|
Vol 22, No 2 (2023) |
Controlled vibration protection systems: optimization and energy efficiency |
(Rus)
|
Chernyshev V.I., Polyakov R.N., Fominova O.V.
|
Vol 22, No 3 (2023) |
Determining aerodynamic characteristics of small unmanned aerial vehicles involving flight experiment |
(Rus)
|
Lukyanov O.E., Zolotov D.V., Espinosa Barsenas O., Komarov V.A.
|
Vol 22, No 2 (2023) |
Development of a model for determination of preloads on blade shrouds |
(Rus)
|
Pechenina E.Y., Kudashov E.V., Pechenin V.A.
|
Vol 22, No 1 (2023) |
Development of an experimental plant and a numerical model of an axial magnetic rotor suspension |
(Rus)
|
Benedyuk M.A., Lomachev A.O., Badykov R.R., Bezborodova K.V., Yurtaev A.A.
|
Vol 22, No 2 (2023) |
Development of hydraulic devices with elastic regulating elements |
(Rus)
|
Berestovitsky E.G., Gladilin Y.F., Pyalov N.V.
|
Vol 22, No 3 (2023) |
Digital model of the drag force of the Earth’s upper atmosphere for the design of low-orbit spacecraft |
(Rus)
|
Volotsuev V.V.
|
Vol 22, No 1 (2023) |
Ensuring vibration characteristics of reactor plant centrifugal pumping equipment |
(Rus)
|
Savchuk D.V., Bescherov D.E., Kulikov D.A., Panov V.A., Patrushev V.L., Porfiriev M.S., Soloviev S.A.
|
Vol 22, No 3 (2023) |
Experimental method for evaluating the balance of high-speed small-sized internal combustion engines |
(Rus)
|
Rekadze P.D., Sychugov S.Y., Melentiev V.S., Rodionov L.V.
|
Vol 22, No 3 (2023) |
Exploratory analysis of hybrid polymer metal-composite structures |
(Rus)
|
Khaliulin V.I., Petrov P.A., Kostin V.A., Levshonkov N.V.
|
Vol 22, No 3 (2023) |
Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process |
(Rus)
|
Matveev V.N., Goriachkin E.S., Popov G.M., Baturin O.V., Kudryashov I.A.
|
Vol 22, No 1 (2023) |
Features of dynamic processes in the “indentor – coating” system during tests on a tribometer |
(Rus)
|
Kolesnikov I.V., Koropets P.A., Manturov D.S., Shakhmatov Y.V.
|
Vol 22, No 2 (2023) |
Influence of complex loading of radial bearings of the oscillation groups of liquid propellant engine steering gear on the frictional moment |
(Rus)
|
Balyakin V.B., Lavrin A.V., Dolgikh D.E.
|
Vol 22, No 2 (2023) |
Method of individual selection of parts for selective assembly of electrohydraulic servo drives |
(Rus)
|
Medvedev A.V., Khalatov E.M.
|
Vol 22, No 1 (2023) |
Methodology for assessing and reducing the aerodynamic imbalance of the impellers of GTE fans |
(Rus)
|
Kudashov E.V., Grachev I.A., Bolotov M.A.
|
Vol 22, No 3 (2023) |
Modal analysis of a spacecraft solar panel |
(Rus)
|
Kryuchkov A.N., Safin A.I., Ermilov M.A., Vidyaskina A.N., Igolkin A.A., Ye. V. Shakhmatov Y.V.
|
Vol 22, No 3 (2023) |
Models for determining the orientation of the solar battery of an observation spacecraft relative to the Sun during object survey and retargeting |
(Rus)
|
Kurenkov V.I., Pupkov E.A.
|
Vol 22, No 2 (2023) |
Multi-position control of movements of large-sized structural elements during static loading using a laser tracker |
(Rus)
|
Sazonnikova N.A., Uklein R.V.
|
Vol 22, No 2 (2023) |
New methods for identifying diagnostic indicators of the technical condition of aircraft gas turbine engine reduction gearboxes |
(Rus)
|
Sundukov A.Y., Shakhmatov Y.V.
|
Vol 22, No 1 (2023) |
Optimization of operation mode and design parameters of a finely-dispersed metallic liquid-alloy generator |
(Rus)
|
Egorychev V.S., Ryazanov A.I., Khaimovich A.I.
|
Vol 22, No 1 (2023) |
Prospects of improving control over the process of electrochemical machining of the blade airfoil profile using the duplex mode method |
(Rus)
|
Smirnov G.V., Shulepov A.P., Mescheryakov A.V.
|
Vol 22, No 1 (2023) |
Results of conjugate modeling and analysis of the thermal state of a high-pressure turbine blade |
(Rus)
|
Matveev V.N., Melnikov S.A., Popov G.M., Zubanov V.M., Kudryashov I.A., Shcherban A.I.
|
Vol 22, No 2 (2023) |
Simulating the process of retargeting of optoelectronic Earth observation spacecraft during object shooting |
(Rus)
|
Kurenkov V.I., Pupkov E.A., Kucherov A.S.
|
Vol 22, No 2 (2023) |
Special features of assessing the strength of nuclear reactor equipment under dynamic loads |
(Rus)
|
Lonin K.A., Panov V.A., Patrushev V.L., Savchuk D.V., Soloviev S.A.
|
Vol 22, No 2 (2023) |
Step-by-step simulation of wear of working surfaces in roller bearings |
(Rus)
|
Klebanov Y.M., Murashkin V.V., Brazhnikova A.M.
|
Vol 22, No 3 (2023) |
Study of the efficiency of the application of gas dynamic stabilization of the flame in a current engine |
(Rus)
|
Belonozhkin V.V., Teslya D.N.
|
Vol 22, No 1 (2023) |
Survey of the flight efficiency of a long-haul aircraft under uncertainty of tasks |
(Rus)
|
Markiewicz P.
|
Vol 22, No 1 (2023) |
The problems of creating a propulsion system of a new generation supersonic passenger aircraft (review) |
(Rus)
|
Alendar A.D., Lanshin A.I., Evstigneev A.A., Yakubovsky K.Y., Siluyanova M.V.
|
Vol 22, No 1 (2023) |
Verification of a transonic stage CFD model for assessing the erosion wear influence on the operation of the axial compressor |
(Rus)
|
Blinov V.L., Zubkov I.S.
|
1 - 34 of 34 Items |
|