Email this article Reduction of pressure fluctuations in the discharge lines of screw compressors
- Authors: Vidyaskina A.N.1, Belov G.O.1, Kryuchkov A.N.1, Taziev K.S.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 10, No 4 (2024): 30.12.2024
- Pages: 122-134
- Section: Articles
- URL: https://journals.rcsi.science/2409-4579/article/view/312333
- DOI: https://doi.org/10.18287/2409-4579-2024-10-4-122-134
- ID: 312333
Cite item
Full Text
Abstract
The article highlights the relevance of reducing the intensity of oscillations in the discharge lines of screw compressors. A calculation methodology for compressor flow oscillations is presented, based on the actual geometry of the screw rotors and the discharge port. Schemes for autonomous and integrated gas oscillation silencers are proposed, designed for installation in the compressor discharge pipeline and housing. The study includes an efficiency analysis of the flow pulsation silencers, demonstrating their high effectiveness within the frequency range up to 2 kHz.
About the authors
Anna N. Vidyaskina
Samara National Research University
Author for correspondence.
Email: vidiaskina@yandex.ru
Postgraduate student
Russian Federation, Moskovskoe shosse, 34, Samara, 443086Gleb O. Belov
Samara National Research University
Email: belov.go@ssau.ru
Candidate of Science (Engineering), Associate Professor
Russian Federation, Moskovskoe shosse, 34, Samara, 443086Aleksandr N. Kryuchkov
Samara National Research University
Email: kryuchkov.an@ssau.ru
Doctor of Science (Engineering), Professor
Russian Federation, Moskovskoe shosse, 34, Samara, 443086Kirill S. Taziev
Samara National Research University
Email: tazievk0403@gmail.com
Student
Russian Federation, Moskovskoe shosse, 34, Samara, 443086References
- Mironova, T., Kryuchkov, A. and Belov, G. (2019), “Dynamical tuning of helical screw compressor”, In the proceedings: INTER-NOISE 2019 MADRID - 48th International Congress and Exhibition on Noise Control Engineering. 48, Noise Control for a Better Environment.
- Belov, G. O. (2015), “Methods of performance calculation of pumps and volumetric compressors providing reduction of their dynamic loading”, Technology of Wheeled and Tracked Vehicles, no. 2, pp. 51-56.
- Belov, G. O. and Kryuchkov, A. N. (2012), “Improvement of the dynamics of a screw compressor”, Shipbuilding, no. 5 (804), pp. 43–46.
- Khisameev, I. G. and Maksimov, V. A. (2000), Dvukhrotornye vintovye i pryamozubye kompressory: teoriya, raschet i proektirovanie [Twin-Rotor Screw and Spur Gear Compressors: Theory, Calculation, and Design], FEN, Kazan, Russia.
- Starobinskiy, R. N. (1982), “Theory and synthesis of noise silencers for intake and exhaust systems of internal Combustion Engines”, D. Sc. Thesis, Thermal Engines, Togliatti Polytechnic Institute, Togliatti, Russia.
- Noise and vibration control engineering: principles and applications (2006), edited by István L. Vér and Leo L. Beranek. 2nd ed. Hoboken, N.J.: John Wiley & Sons, Physical description, 966 p.
- Glikman, B. F. (1986), Matematicheskie modeli pnevmogidravlicheskikh sistem [Mathematical Models of Pneumohydraulic Systems], Nauka, Moscow, Russia.
- Lependin, L. F. (1978), Akustika [Acoustics], Vysshaya shkola, Moscow, Russia.
- Shorin, V. P. (1980), Ustranenie kolebaniy v aviatsionnykh truboprovodakh [Elimination of Vibrations in Aircraft Pipelines], Mashinostroenie, Moscow, Russia.
- Kryuchkov, A. N., Ermilov, M. A., Ermilova, E. N., Balakhonov, I. V. and Vidyaskina, A. N. (2019), “Development of a pulsation dampener for hydraulic systems of power plants”, VESTNIK of Samara University. Aerospace and Mechanical Engineering, vol. 18, no. 2, pp. 146–155.
- Belov, G. O. (2012), “Development of Calculation Methods for Positive Displacement Pumps and Compressors to Reduce Their Dynamic Loading”, Abstract of Ph.D. dissertation, Dynamics and Strength of Machines, Instruments, and Apparatus, Samara National Research University, Samara, Russia.
Supplementary files
