About possibility of using low frequency magnetic field in woodprocess industry

Cover Page

Cite item

Abstract

The subject of the investigation is drying of wood with the help of the extremely low-frequency magnetic field. The investigation is aimed at studying the process of the humidity-transfer during the process of the wood drying with the help of the extremely low-frequency magnetic field and comparison with the check frequency. It is proved that wood can be dried with extremely low-frequency magnetic field. Compared with the check samples, significant humidity-transfer acceleration can be reached without the transit of the liquid over the critical point.

About the authors

M G Barishev

Kuban state university

Физико-технический факультет; Кубанский государственный университет; Kuban state university

S S Dzhimak

Kuban state university

Физико-технический факультет; Кубанский государственный университет; Kuban state university

N N Kylikova

Kuban state university

Физико-технический факультет; Кубанский государственный университет; Kuban state university

Supplementary files

Supplementary Files
Action
1. JATS XML

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).