Evaluation of the technical condition of electromagnetic injectors on the test bench according to the error in measuring the flow rate of the test liquid
- Autores: Khodyakov A.A.1, Khlopkov S.V.1, Basova V.V.1, Telkov O.I.1, Kosmacheva A.D.1
-
Afiliações:
- Peoples’ Friendship University of Russia (RUDN University)
- Edição: Volume 23, Nº 2 (2022)
- Páginas: 146-154
- Seção: Articles
- URL: https://journals.rcsi.science/2312-8143/article/view/327495
- DOI: https://doi.org/10.22363/2312-8143-2022-23-2-146-154
- ID: 327495
Citar
Texto integral
Resumo
It has been established that the average values of the error in measuring the flow rate of the test liquid (TL) by electromagnetic injectors (EMI) are associated with the vehicle mileage. The greater the mileage, the higher the value of the error. It is shown that the dependence of the error in measuring the flow rate on the run can be described in a rough approximation by regression. The technical condition of the EMI was assessed by an instrument for cleaning and analyzing fuel injectors HP-6V, complete with an Ultrasonic Cleaner ultrasonic bath. The objects of study are the EMI of gasoline engines with distributed fuel injection. The injectors were used in the power units of GAZ-27040 V (“Gazelle”), ZAZ Chance SX, VAZ 2121 (“Niva”), Chevrolet Lacetti and others, mileage from 0 to 188 thousand km. Siemens DEKA ZMZ 6354, Siemens DEKA VAZ 6238, Siemens DEKA VAZ 20734, Siemens DEKA VAZ 20735, Bosch 0 280 158 502, Bosch 0 280 158 017, Bosch 0 280 158 022, Bosch 0 280 150 9925, Denso 23925 injectors tested.
Sobre autores
Aleksandr Khodyakov
Peoples’ Friendship University of Russia (RUDN University)
Email: khodyakov-aa@rudn.ru
ORCID ID: 0000-0001-9391-2890
Candidate of Chemical Sciences, Associate Professor of the Department of Transport, Academy of Engineering
6 Miklukho-Maklaya St, Moscow, 117198, Russian FederationSergey Khlopkov
Peoples’ Friendship University of Russia (RUDN University)
Email: khlopkov-sv@rudn.ru
ORCID ID: 0000-0001-9536-7558
Candidate of Technical Sciences, Associate Professor of the Department of Transport, Academy of Engineering
6 Miklukho-Maklaya St, Moscow, 117198, Russian FederationVlada Basova
Peoples’ Friendship University of Russia (RUDN University)
Email: 1032202133@rudn.ru
ORCID ID: 0000-0002-1325-4646
master’s student, Department of Transport, Academy of Engineering
6 Miklukho-Maklaya St, Moscow, 117198, Russian FederationOleg Telkov
Peoples’ Friendship University of Russia (RUDN University)
Email: 1032202136@rudn.ru
ORCID ID: 0000-0003-1412-6539
master’s student, Department of Transport, Academy of Engineering
6 Miklukho-Maklaya St, Moscow, 117198, Russian FederationAnastasia Kosmacheva
Peoples’ Friendship University of Russia (RUDN University)
Autor responsável pela correspondência
Email: 1032202134@rudn.ru
ORCID ID: 0000-0002-3749-5225
master’s student, Department of Transport, Academy of Engineering
6 Miklukho-Maklaya St, Moscow, 117198, Russian FederationBibliografia
- Vereyutin AYu. A method for diagnosing electromagnetic nozzles of engines with gasoline injection (dissertation of Candidate of Technical Sciences). Ryazan; 2010. (In Russ.)
- Ovchinnikov GV. Influence of pollution and wear of elements of electromagnetic nozzles on the characteristics of an automobile gasoline engine (dissertation of Candidate of Technical Sciences). Vladimir; 2009. (In Russ.)
- Tsedashiev TsV. On the necessity of flushing and cleaning the nozzles of the injection power supply system. Scientific Research of Students in Solving Urgent Problems of the Agro-Industrial Complex: Materials of the Regional Student Scientific-Practical Conference (vol. 2). Irkutsk: Irkutsk State Agrarian University named after A.A. Ezhevsky; 2016. p. 253–258. (In Russ.)
- Grigoriev MV, Dalidovich AA. Diagnostics and maintenance of electromagnetic nozzles of gasoline internal combustion engines: guidelines for laboratory work on the courses “Operation of Ground Transport and Technological Means,” “Fundamentals of Diagnostics of Ground Transport and Technological Means.” Moscow: MADI Publ.; 2018. (In Russ.)
- Zelenin VA, Sukhanov SA. Method for preliminary diagnosing performance gasoline engine type injector. Scientific Bulletin NSHTI. 2017;3:33–36. (In Russ.)
- Berezyukov DS. Development of a method for in-place diagnostics of electromagnetic injectors of internal combustion engines with light fuel injection and a study of changes in their performance (dissertation of Candidate of Technical Sciences). Volgograd; 2012. (In Russ.)
- Kiselev DV, Shurin SA. Flushing injectors and fuel rail of a gasoline engine without dismantling and using specialized equipment. Scientific Problems of Logistics of the Armed Forces of the Russian Federation: Collection of Scientific Papers. St Petersburg: Polytechnic University Publ.; 2017. p. 221–226. (In Russ.)
- Beauty MV, Shepelenko IV, Matvienko AA, Al Soodani Salem M. Mutashair. Study of the influence of contamination of electromagnetic injectors on the parameters of gasoline engines. Design, Production and Operation of Agricultural Machinery. 2013;43(part 2);125–133. (In Russ.)
- Patrin AN, Nechaev VV, Merkushov YuN. Functional diagnostics of electromagnetic injectors of injection internal combustion engines with spark ignition. Automotive Industry. 2007;(8):29–31. (In Russ.)
- Bazhenov YuV, Kalenov VP. Forecasting the residual life of electronic engine control systems. Bulletin of SibADI. Section II. Transport. 2017;(2(45)):52–59.
- Gritsay AV, Gorban MV, Arakelyants AG. Study of the operation of an injection engine with electromagnetic nozzles of various technical conditions. Scientific Community of Students of the 21st century. Technical Science: Electronic Collection of Articles based on Materials of the 21st International Student Correspondence Scientific and Practical Conference. 2014;(6(21)):109–114. (In Russ.)
- Zaloznov IP. Improving the efficiency of car operation by substantiating the frequency of maintenance of electromagnetic injectors (dissertation of Candidate of Technical Sciences). Omsk; 2003. (In Russ.)
- Bakaikin DD, Gritsenko AV, Abrosimov DA. Diagnosing electromagnetic ICE injectors at text modes. Agro-Industrial Complex of Russia. 2015;72(1):16–18. (In Russ.)
- Bazhenov YV, Kalenov VP. The forecasting of the residual resource of electronic engine control system. The Russian Automobile and Highway Industry Journal. 2017;(2(54)):52–59. (In Russ.) https://doi.org/10.26518/2071-7296-2017-2(54)-52-59
- Yakovlev VB. Linear and non-linear estimation of regression parameters in Microsoft Excel. MCU Journal of Informatics and Informatization of Education. 2019;(2(48)):58–71. (In Russ.)
- Vladlenova VO, Turundaevsky VB. Some peculiarities arising in the study of nonlinear regression using Excel and other programs. Economics, Statistics and Computer Science. 2014;(1):158–161. (In Russ.)
- Kalenov VP. Development of a system for ensuring the operability of electronic control systems for a car engine in operation (dissertation of Candidate of Technical Sciences).Vladimir; 2018. (In Russ.)
- Gorbunova EB. A method of statistical processing of small data samples in the problems of forecasting and monitoring the state of complex systems (dissertation of Candidate of Technical Sciences). Novocherkassk; 2018. (In Russ.)
Arquivos suplementares
