Application of plates coated with roughing in heavy lathes

V V Soloviev; Соловьёв Виктор Викторович; E V Mironenko; Мироненко Евгений Васильевич; V S Guzenko; Гузенко Виталий Семенович

Application of plates coated with roughing in heavy lathes

Authors: Soloviev VV¹, Mironenko EV², Guzenko VS²
Affiliations:
1. Peoples' Friendship University of Russia
2. Donbass State Engineering Academy
Issue: No 3 (2010)
Pages: 54-59
Section: Articles
URL: https://journals.rcsi.science/2312-8143/article/view/335831
ID: 335831

Cite item

Full Text

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

In work results of researches of characteristics of wear resistance of plates with multilayered coverings are resulted at draft tool on heavy that machine tools. Recommendations at the choice of optimum modes of cutting with use of special many-sided plates with deterioration coverings are developed

Keywords

turning, lathe, wear, cutting plate

About the authors

V V Soloviev

Peoples' Friendship University of Russia

Email: viktorviktor229@yandex.ru
Кафедра технологии машиностроения,металлорежущих станков и инструментовИнженерный факультет; Российский университет дружбы народов; Peoples' Friendship University of Russia

E V Mironenko

Donbass State Engineering Academy

Email: ief@dgma.donetsk.ua
Кафедра металлорежущих станков и инструментов; Донбасская государственная машиностроительная академия; Donbass State Engineering Academy

V S Guzenko

Donbass State Engineering Academy

Email: msi@dgma.donetsk.ua
Кафедра металлорежущих станков и инструментов; Донбасская государственная машиностроительная академия; Donbass State Engineering Academy

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register