COMPUTER-AIDED DESIGN OF TYPE C4: COMPRESSOR BLADE PROFILE
- Authors: Vinogradov L.V1, Mamaev V.K1, Oshcepkov P.P1
-
Affiliations:
- Peoples’ Friendship University of Russia (RUDN University)
- Issue: Vol 19, No 2 (2018)
- Pages: 155-164
- Section: Mechanical engineering and power-plant
- URL: https://journals.rcsi.science/2312-8143/article/view/335260
- DOI: https://doi.org/10.22363/2312-8143-2018-19-2-155-164
- ID: 335260
Cite item
Full Text
Abstract
The paper presents the results of designing a compressor blade profile of type C4 using CAD, which implements the method of nonlinear transformation. Girst transformation was used by the authors. All calculations and graphical representations were made in the computer algebra system Mathcad. For the calculation and graphical representation the centreline is approximated with three nonlinear segments in the form of second order Bezier curve. After determining the first and last point of the second order Bezier curve, the coordinates of the middle point on the intersection of tangential lines that start at the first and last point of the curve are determined. After the approximation of three sections with second order Bezier curves the integral function of the blade back (convex side of the contour) of the profile C4 considering the leading and trailing edges are made as arcs. According to the analytical formulas, the geometric parameters of the curved profile were calculated, which are necessary for calculating the strength of the compressor blade.
About the authors
Leonid V Vinogradov
Peoples’ Friendship University of Russia (RUDN University)
Author for correspondence.
Email: vinogradov_lv@rudn.university
Candidate of Technical Sciences, education master of the Department of Mechanical and Tool Engineering at the Academy of Engineering of Peoples’ Friendship University of Russia. Research interests: computer aided design systems, turbines, gas dynamic of turbomachines
6, Miklukho-Maklaya str., Moscow, 117198, Russian FederationVladimir K Mamaev
Peoples’ Friendship University of Russia (RUDN University)
Email: mamaev_vk@rudn.university
senior professor of the Department of Mechanical and Tool Engineering at the Academy of Engineering of Peoples’ Friendship University of Russia. Research interests: computer aided design systems, turbines, acoustic and wave processes
6, Miklukho-Maklaya str., Moscow, 117198, Russian FederationPetr P Oshcepkov
Peoples’ Friendship University of Russia (RUDN University)
Email: oshchepkov_pp@rudn.university
Candidate of Technical Sciences, Assistant Professor of the Department of Mechanical and Tool Engineering at the Academy of Engineering of Peoples’ Friendship University of Russia. Research interests: computer aided design systems, internal combustion engines operation, alternative fuels
6, Miklukho-Maklaya str., Moscow, 117198, Russian FederationReferences
- Ivanov G.S. Konstruirovanie tekhnicheskikh poverkhnostei (matematicheskoe modelirovanie na osnove nelineinykh preobrazovanii) [Design of technical surfaces (mathematical modelling on the basis of nonlinear transformations)]. Moscow: Mashinostroenie Publ., 1987. 192 p. (in Russ.)
- Holshevnikov K.V. Teoriya i raschet aviatsionnykh lopatochnykh mashin [Theory and analysis of aircraft impeller machines]. Moscow: Mashinostroenie Publ., 1970. 610 p. (in Russ.)
- Seleznev K.P., Galyorkin J.B., Anisimov S.A., Mitrofanov V.P., Podobuev U.S. Teoriya i raschet turbokompressorov [Theory and analysis of turbocompressors]. L.: Mashinostroenie Publ. (Leningradskoe otdelenie), 1986. 392 p. (in Russ.)
- Skubachvsky G.S. Aviatsionnye gazoturbinnye dvigateli. Konstruktsiya i raschet detalei [Aircraft gas turbine engines. Construction and analysis of parts]. Moscow: Mashinostroenie Publ., 1981. 550 p. (in Russ.)
- Makarov E. Inzhenernye raschety v MathCAD: uchebnyi kurs [Engineering calculations in Mathcad. Educational course]. SPb.: Piter, 2003. 448 p. (in Russ.)
Supplementary files
