On the issue of assessing the thermoerosion wear of the barrels of small-caliber automatic guns
- Authors: Pushkarev A.M.1, Abramychev I.S.2
-
Affiliations:
- the Department in Permskij voenny`j institut vojsk nacional`noj gvardii RF
- Permskij voenny`j institut vojsk nacional`noj gvardii RF
- Issue: Vol 11, No 209-210 (2025): Вопросы оборонной техники. Серия 16. Технические средства противодействия терроризму
- Pages: 107-111
- Section: Articles
- URL: https://journals.rcsi.science/2306-1456/article/view/361230
- ID: 361230
Cite item
Full Text
Abstract
The article discusses the assessment of the thermo-force effect of the powder gas flow on the surface of the barrel of a small-caliber automatic gun. The dominant cause of the loss of survivability of the barrels of small-caliber automatic guns is the change in the temperature of the surface layer of the barrel during firing, which leads to the appearance of a grid of thermal fatigue cracks (thermal erosion wear) that disrupt the continuity of the barrel surface. To this end, the article analyzes the criteria for low-cycle thermal fatigue. Based on this, a criterion for assessing the thermoerosion wear of the barrels of small-caliber automatic guns has been proposed, taking into account the cyclic temperature stresses and deformations in the barrel wall. The proposed dependence allows for the calculation of the thermoerosion wear of the barrels of small-caliber automatic guns, taking into account their number of shots.
About the authors
A. M. Pushkarev
the Department in Permskij voenny`j institut vojsk nacional`noj gvardii RF
Author for correspondence.
Email: alex.pushkarev2018@yandex.ru
Candidate of Sciences, Professor, Professor
Russian FederationI. S. Abramychev
Permskij voenny`j institut vojsk nacional`noj gvardii RF
Email: abramychev.is@yandex.ru
Associate Professor
Russian FederationReferences
- Лазарев С.Ю., Калинин В.Ю., Медянников М.А. О возможности улучшения параметров ствольных систем методом устранения потерь при выстреле // Известия Российской академии ракетных и артиллерийских наук. 2021. № 2 (117). С. 136–142.
- Шипунов А.Г., Швыкин Ю.С. Живучесть стволов скорострельных пушек и способы ее обеспечения. М.: Машиностроение, 1977. 168 с.
- Пушкарёв А.М., Абрамычев И.С. К вопросу оценки живучести стволов малокалиберного автоматического оружия; сб. науч. тр. научно-техн. конф. «Перспективы совершенствования боеприпасов и развития спецхимии». Пенза: филиал ВА МТО. 2024. С. 527–530.
- Логвинов В.С. Расчет эрозионного изнашивания канала ствола // Оборонная техника. 1991. № 1. С. 49–51.
- Дульнев Р.А. Суммирование повреждений и условие прочности при термоциклическом нагружении // Проблемы прочности. 1971. № 10. C. 101–104.
- Серенсен С.В., Шнейдерович Р.М., Гусенков А.П. и др. Прочность при малоцикловом нагружении. М.: Наука, 1975. 287 с.
- Coffin L.F. Thermal stress and thermal stress fatigue. SESA Proceedings. 1958. Vol. IV. No 2. Рp. 117–130.
- Гусенков А.П., Котов П.И. Малоцикловая усталость при неизотермическом нагружении. М.: Машиностроение, 1983. 240 с.
- Шнейдерович Р.М., Гусенков А.П. Деформационно-кинетические подходы к оценке длительной циклической прочности // Материалы Всесоюзного симпозиума по малоцикловой усталости при повышенных температурах. Челябинск: ЧПИ. 1974. Вып. 3. С. 140–165.
- Иванова С.А., Романов Р.Б. Расчет двухмерного температурного поля ствола автоматического оружия // Оборонная техника. 1980. № 7. С. 39–41.
- Хижняк А.Е., Сметанин С.Д., Калинин В.Ю. Оценка теплового состояния стволов артиллерийских орудий при стрельбе // Известия Российской академии ракетных и артиллерийских наук. 2013. № 3 (78). С. 35–39.
- Методика расчета теплового состояния ствола автоматической пушки при стрельбе: свид. о гос. регистр. программы для ЭВМ 2025616203 Рос. Федерация № 2025614538; заявл. 03.03.2025; опубл. 13.03.2025, Бюл. № 3.
Supplementary files
