NECESSARY CONDITIONS TO ENSURE THE STRENGTH OF INDIVIDUAL PARTS OF THE MOTION RESTRAINT MADE OF POLYAMIDE
- Authors: Kolomiets S.N.1, Kozlov S.A.1
-
Affiliations:
- НПО «СТиС» МВД России
- Issue: Vol 5, No 203-204 (2025)
- Pages: 91-97
- Section: Articles
- URL: https://journals.rcsi.science/2306-1456/article/view/310003
- ID: 310003
Cite item
Full Text
Abstract
The authors propose a design scheme of a device for throwing a net with a single-use polyamide bell with a propelling cartridge in it with an electric primer-igniter. The necessary conditions are considered that ensure sufficient strength of the bell barrel when fired. For the manufacture of individual parts of the device and the bell body, it is proposed to use polyamide with sufficiently high strength characteristics and insignificant weight in comparison with metal. It is taken into account that when fired, the bell barrel and other parts of the device will experience significant deformation under the action of the maximum pressure of powder gases. The strength of individual parts of the device is calculated. Acceptable calculated values of the strength characteristics of parts made of polyamide are obtained and a conclusion is made on the possibility of using the selected material.
About the authors
S. N. Kolomiets
НПО «СТиС» МВД России
Author for correspondence.
Email: kоlomiec_sergei@mail.ru
старший научный сотрудник отдела научно-технической информации,
Russian FederationS. A. Kozlov
НПО «СТиС» МВД России
Email: skozlov104@mvd.ru
старший научный сотрудник центра вооружения и индивидуальной бронезащиты НИИСТ
Russian FederationReferences
- О полиции: федер. Закон Рос. Федерации от 7 февраля 2011 г. № 3-ФЗ: принят Гос. Думой Федер. Собр. Рос. Федерации 28 января 2011 г.: одобр. Советом Федерации Федер. Собр. Рос. Федерации 2 февраля 2011 г. // Рос. Газ. – 2011. – 8 февраля.
- Средство сковывания движений биологических объектов «Невод». Технические условия НПФТ.043000.000 ТУ. 8 с.
- Патроны монтажные Д4 6,8×18 мм для монтажного пистолета. URL: www/avtoprom/net/патрон_монтажный_мпу_1 (дата обращения: 10.07.24).
- Полиамид 6 (ПА 6). URL: https://anid.ru/poliamid/6?ysclid=mbp5ix7yjx745000952 (дата обращения: 11.06.24).
- Феодосьев В.И. Сопротивление материалов: учебник для втузов. 9-е изд., перераб. М. Наука, гл. ред. физ-мат. лит. 1986. 512 с.
- Серебряков М.Е. Физический закон горения во внутренней баллистике. М.: Оборонгиз, 1940. 214 с.
- Бетехтин С.А., Винницкий А.М., Горохов М.С. Газодинамические основы внутренней баллистики. М.: Оборонгиз, 1957. 151 с.
Supplementary files
