FEATURES OF THE FORMATION OF AN ARRAY OF ISOLATED POLYMER P(VDF-TrFE) NANOPARTICLES IN PORES OF A PERIODIC NANOSTRUCTURED SILICON OXIDE MEMBRANE
- Authors: Belov A.N.1, Vostrov N.V.2, Pestov G.N.1, Solnyshkin A.V.2
-
Affiliations:
- National Research University of Electronic Technology, Zelenograd
- Tver State University
- Issue: No 15 (2023)
- Pages: 629-636
- Section: Physical and chemical foundations of nanotechnology
- URL: https://journals.rcsi.science/2226-4442/article/view/378492
- DOI: https://doi.org/10.26456/pcascnn/2023.15.629
- EDN: https://elibrary.ru/OUCBDB
- ID: 378492
Cite item
Full Text
Abstract
This work is devoted to the technological features of creating an array of pyroelectric nanoparticles placed in the pores of a silicon oxide membrane, ensuring their thermal insulation both from each other and from the supporting substrate. Mechanisms of anodic oxidation of the Al/Ti/SiO 2 structure, ensuring the self-organization of a nanostructured oxide mask with specified geometric parameters, have been established. It has been shown that from a certain thickness of the adhesion layer, overgrowing of the open areas of the mask with titanium oxide nanoparticles does not occur. The regularities of the method of local ion etching of multilayer structures are determined, which ensures control of the depth of the formed pores by controlling the ion current. A correlation has been established between the lateral size of the cavities in silicon and the aspect ratio of aluminum oxide pores. The possibility of forming a silicon oxide membrane with pyroelectric polymer nanoparticles embedded in its pores has been demonstrated.
About the authors
Alexey N. Belov
National Research University of Electronic Technology, Zelenograd
Email: nanointech@mail.RUS
Moscow, Russia
Nikita V. Vostrov
Tver State UniversityTver, Russia
Grigory N. Pestov
National Research University of Electronic Technology, ZelenogradMoscow, Russia
Alexander V. Solnyshkin
Tver State UniversityTver, Russia
References
- Yadav, P. Advancements of uncooled infrared microbolometer materials: A review / P. Yadav, I. Yadav, B. Ajitha et al. // Sensors and Actuators A: Physical. - 2022. - V. 342. - Art. № 113611. - 19 p. doi: 10.1016/j.sna.2022.113611.
- Ambrosio, R.C. An overview of uncooled infrared sensors technology based on amorphous silicon and silicon germanium alloys / R.C. Ambrosio, M. Moreno, J. Mireles et al. // Physica Status Solidi C. - 2010.- V. 7. - I. 3-4. - P. 1180-1183. doi: 10.1002/pssc.200982781.
- Liu, S. La0.7Sr0.3MnO3 suspended microbridges for uncooled bolometers made using reactive ion etching of the silicon substrates / S. Liu, B. Guillet, A. Aryan et al. // Microelectronic Engineering. - 2013. - V. 111.- P. 101-104. doi: 10.1016/j.mee.2013.02.024.
- Idczak, K. Platinum silicide formation on selected semiconductors surfaces via thermal annealing and intercalation / K. Idczak, S. Owczarek, L. Markowski // Applied Surface Science. - 2022. -V. 572.- Art. № 151345. - 12 p. doi: 10.1016/j.apsusc.2021.151345.
- Varpula, A. Nano-thermoelectric infrared bolometers featured / A. Varpula, K. Tappura, J. Tiira et al. // APL Photonics. - 2021. - V. 6. - I. 3. - Art. № 036111. - 10 p. doi: 10.1063/5.0040534.
- Whatmore, R.W. Pyroelectric infrared detectors and materials - A critical perspective / R.W. Whatmore, S.J. Ward // Journal of Applied Physics. - 2023. - V. 133. - I. 8. - Art. № 080902. - 27 p. doi: 10.1063/5.0141044.
- Solnyshkin, A.V. Dynamic pyroelectric response of composite based on ferroelectric copolymer of poly(vinylidene fluoride-trifluoroethylene) and ferroelectric ceramics of barium lead zirconate titanate / A.V. Solnyshkin, I.M. Morsakov, A.A. Bogomolov et al. // Applied Physics A. - 2015. - V. 121. - I. 1. - P. 311-316. doi: 10.1007/s00339-015-9446-z.
- Jeon, G.-J. Thin-film vacuum packaging based on porous anodic alumina (PAA) for infrared (IR) detection / G. Jeon, W.Y. Kim, H.C. Lee // Proceedings of the Sensors, 2012 IEEE, 28-31 October 2012, Taipei. - 2012.- P. 1-4. doi: 10.1109/ICSENS.2012.6411110.
- Jeon, G.-J. Nanoporous Pirani sensor based on anodic aluminum oxide / G.-J. Jeon, W.Y. Kim, H.B. Shim, H.C. Lee // Applied Physics Letters. - 2016. - V. 109. - I. 12. - Art. № 123505. - 5 p. doi: 10.1063/1.4963183.
- Belov, A.N. Local etching of silicon using a solid mask from porous aluminum oxide / A.N. Belov // Semiconductors. - 2008. - V. 42. - I. 13. - P. 1519-1521. doi: 10.1134/S1063782608130149.
- Belov, A.N. Formation of piezo- and pyroelectric matrices with the use of nanoprofiled silica / A.N. Belov, A.A. Golishnikov, G.N. Pestov et al. // Nanotechnologies in Russia. - 2018. - V. 13. - I. 6. - P. 609-613. doi: 10.1134/S1995078018060034.
- Belov, A.N. Silicon nanoprofiling with the use of a solid aluminum oxide mask and combined "dry" etching / A.N. Belov, Yu.A. Demidov, M.G. Putrya et al. // Semiconductors. - 2009. - V. 43. - I. 13. - P. 1660-1662. doi: 10.1134/S1063782609130090.
- Belov, A.N. Features of the formation of porous alumina mask for local plasma etching of semiconductors / A.N. Belov, S.A. Gavrilov, Yu.A. Demidov, V.I. Shevyakov // Nanotechnologies in Russia. - 2011. - V. 6.- I. 11-12. - Р. 711-716. doi: 10.1134/S199507801106005X.
- Belov, A.N. Electrical characterization of poly(vinylidene fluoride-trifluoroethylene) nanocrystals embedded in porous alumina matrix / A.N. Belov, I.L. Kislova, D.V. Loktev et al. // Journal of Advanced Dielectrics.- 2018. - V. 8. - I. 1. - Art. № 1820001. - 5 p. doi: 10.1142/S2010135X18200011.
Supplementary files
