Development and optimization of the synthesis procedure of selenium nanoparticles stabilized by methylcellulose

As a result of the work performed, a method for synthesizing selenium nanoparticles stabilized with methylcellulose was developed and optimized. Selenious acid was used as a selenium-containing precursor, ascorbic acid as a reducing agent, and methylcellulose as a stabilizer. A multifactorial experiment was conducted to optimize the method for synthesizing selenium nanoparticles stabilized with methylcellulose. It was found that for the synthesis of selenium nanoparticles with the smallest average hydrodynamic radius, the molar concentration of selenious acid in the solution should be in the range from 0,0036 to 0,1033 mol/l, the mass of methylcellulose - from 3,0 to 3,985 g, the molar concentration of ascorbic acid - from 1,52 to 2,12 mol/l. It is shown that pH of the medium, charge and concentration of sodium and barium ions do not affect the average hydrodynamic radius of selenium nanoparticles stabilized with methylcellulose. However, when exposed to iron ions, the radius increases from 150 to 270 nm. It is established that an increase in the concentration and charge of anions has a significant effect on the average hydrodynamic radius of selenium nanoparticles stabilized with methylcellulose. With an increase in the concentration of chlorine ions from 0,1 to 1 mol/l, an increase in the average hydrodynamic radius of particles occurred from 143 to 156 nm, with an increase in the concentration of sulfate ions from 0,1 to 1 mol/l, an increase in the average hydrodynamic radius of particles - from 165 to 6129 nm, with an increase in the concentration of phosphate ions from 0,1 to 1 mol/l, an increase in the average hydrodynamic radius of particles - from 149 to 17000 nm.

selenium, nanoparticles, methylcellulose, average hydrodynamic radius, optimization