Email this article APPLICATION OF COMBINED ACTION METHODS FOR THE SURFACE LAYER OF MACHINE PARTS IN SCIENCE-INTENSIVE TECHNOLOGIES
- Authors: Albagachiev A.Y.1, Yakovleva A.P.2
-
Affiliations:
- Mechanical Engineering Research Institute of the Russian Academy of Sciences
- Bauman Moscow State Technical University
- Issue: No 3 (141) (2023)
- Pages: 12-18
- Section: Technologies of electromachining and combined processing
- URL: https://journals.rcsi.science/2223-4608/article/view/350118
- DOI: https://doi.org/10.30987/2223-4608-2023-12-18
- ID: 350118
Cite item
Full Text
Abstract
Residual potential theoretical de-pendence upon the modes of combined machin-ing operations and physical and mechani-cal properties of the processed material under the influence of the inheritance factor is presented. Experimental evidence of dependence sufficiency is given.
About the authors
Ali Yusupovich Albagachiev
Mechanical Engineering Research Institute of the Russian Academy of Sciences
Author for correspondence.
Email: Albagachiev@yandex.ru
professor, doctor of technical sciences
Anna Petrovna Yakovleva
Bauman Moscow State Technical University
Email: yakovleva525@mail.ru
Candidate of Technical Sciences; Assistant Professor of the Department of Manufacturing Technologies
References
Суслов А.Г., Федоров В.П., Горленко О.А. и др. Технологическое обеспечение и повышение эксплу-атационных свойств деталей и их соединений / под общей ред. А.Г. Суслова. М: Машиностроение, 2006. 448 с. EDN: QNBERD Григорьев С.Н., Смоленцев Е.В., Волосова М.А. Технология обработки концентрированными по-токами энергии. Старый Оскол: ТНТ, 2009. 220 с. EDN: PVITKV Суслов А.Г., Федоров В.П., Горленко О.А. и др. Фундаментальные основы технологического обес-печения и повышения надежности изделий машино-строения / под редакцией А.Г. Суслова. 2022. 552 с. EDN: DCEFZK Суслов А.Г. Комплексные исследования каче-ства поверхностного слоя деталей машин // Техноло-гическое управление качеством поверхности деталей: Сб. науч. тр. Киев, 1998. С. 21-27. Суслов А.Г. Технологическое обеспечение па-раметров состояния поверхностного слоя деталей. М: Машиностроение, 1987. 208 с. Grigor’yants A.G., Shiganov I.N. Development of Domestic Equipment for Laser Additive Technologies by Melting Metallic Powders // Russian Metallurgy (Metal-ly). 2020. 2020(6). Р. 649-653 Fedorov S., Albagachiev A., Isaenkova M., Ya-kovleva A., Zaripov V., Minushkin R. Тhe effect of com-bined processing schedules on the value and nature of re-sidual stresses in the surface layer of cylindrical friction pairs // В сборнике: IOP Conference Series: Materials Sci-ence and Engineering. electronic edition. 2019. 012032. Yakovleva A.P., Albagachiev A.Y. Тheoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs // Journal of Machinery Manufacture and Reliability. 2020. Vol. 49(3). Р. 237-242 doi: 10.3103/S1052618820020144; EDN: RBGBMY Yakovleva A., Isaenkova M., Minushkin R. The Effect of Combined Processing on Residual Stresses in the Surface Layer of Power Plant Parts // Materials. 2022. Vol. 15(2). 420.
Supplementary files
