Effect of electromechanical treatment on the structure and microhardness of plasma coating from Cr–Mn steel

A. Yu. Ivannikov; V. I. Kalita; D. I. Komlev; A. A. Radyuk; V. P. Bagmutov; I. N. Zakharov; S. N. Parshev

doi:10.1134/S2075113316030096

Effect of electromechanical treatment on the structure and microhardness of plasma coating from Cr–Mn steel

Авторы: Ivannikov A.¹, Kalita V.¹, Komlev D.¹, Radyuk A.¹, Bagmutov V.², Zakharov I.², Parshev S.²
Учреждения:
1. Baikov Institute of Metallurgy and Materials Science
2. Volgograd State Technical University
Выпуск: Том 7, № 3 (2016)
Страницы: 363-371
Раздел: Plasma Chemical Methods of Production and Treatment of Materials
URL: https://journals.rcsi.science/2075-1133/article/view/205069
DOI: https://doi.org/10.1134/S2075113316030096
ID: 205069

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Статистика

Аннотация

The effect of electromechanical treatment (EMT) on the structure and microhardness of a plasma coating prepared from austenite steel is investigated at 25 and 500°C. The EMT current is varied from 400 to 800 A, the treatment rate is 0.81–3.39 m/min, and the number of passes is from one to four. Consolidation of the coating is observed after EMT. Its microhardness increases from 1866 to 4618 MPa under EMT without heating of the sample and to 5814 MPa under EMT with heating to 500°C.