Effect of electromechanical treatment on the structure and microhardness of plasma coating from Cr–Mn steel

A. Yu. Ivannikov; V. I. Kalita; D. I. Komlev; A. A. Radyuk; V. P. Bagmutov; I. N. Zakharov; S. N. Parshev

doi:10.1134/S2075113316030096

Effect of electromechanical treatment on the structure and microhardness of plasma coating from Cr–Mn steel

Авторлар: Ivannikov A.¹, Kalita V.¹, Komlev D.¹, Radyuk A.¹, Bagmutov V.², Zakharov I.², Parshev S.²
Мекемелер:
1. Baikov Institute of Metallurgy and Materials Science
2. Volgograd State Technical University
Шығарылым: Том 7, № 3 (2016)
Беттер: 363-371
Бөлім: Plasma Chemical Methods of Production and Treatment of Materials
URL: https://journals.rcsi.science/2075-1133/article/view/205069
DOI: https://doi.org/10.1134/S2075113316030096
ID: 205069

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Статистика

Аннотация

The effect of electromechanical treatment (EMT) on the structure and microhardness of a plasma coating prepared from austenite steel is investigated at 25 and 500°C. The EMT current is varied from 400 to 800 A, the treatment rate is 0.81–3.39 m/min, and the number of passes is from one to four. Consolidation of the coating is observed after EMT. Its microhardness increases from 1866 to 4618 MPa under EMT without heating of the sample and to 5814 MPa under EMT with heating to 500°C.