Application of the filler composite rods based on the B83 babbit alloy for production of the antifriction coatings by arc welding
- Autores: Mikheyev R.1, Kobernik N.1, Kalashnikov I.2, Bolotova L.2, Bykov P.2, Kobeleva L.2, Kolmakov A.2
-
Afiliações:
- Bauman Moscow State Technical University
- Baikov Institute of Metallurgy and Materials Science
- Edição: Volume 8, Nº 5 (2017)
- Páginas: 745-749
- Seção: General Purpose Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/206856
- DOI: https://doi.org/10.1134/S2075113317050161
- ID: 206856
Citar
Resumo
The tribological properties of the antifriction composite coatings produced by arc surfacing on a steel substrate were studied. It was shown that application of the composite filler rods based on the B83 babbit alloy containing submicron particles of boron and boron carbide and micron-size silicon carbide particles makes it possible to obtain a coating with 20–40% lower friction coefficients in the case of increase in the wear resistance by 20–35% as compared with the layer formed with the use of the same B83 babbit filler rods.
Palavras-chave
Sobre autores
R. Mikheyev
Bauman Moscow State Technical University
Autor responsável pela correspondência
Email: mikheev.roman@mail.ru
Rússia, Moscow, 105005
N. Kobernik
Bauman Moscow State Technical University
Email: mikheev.roman@mail.ru
Rússia, Moscow, 105005
I. Kalashnikov
Baikov Institute of Metallurgy and Materials Science
Email: mikheev.roman@mail.ru
Rússia, Moscow, 119334
L. Bolotova
Baikov Institute of Metallurgy and Materials Science
Email: mikheev.roman@mail.ru
Rússia, Moscow, 119334
P. Bykov
Baikov Institute of Metallurgy and Materials Science
Email: mikheev.roman@mail.ru
Rússia, Moscow, 119334
L. Kobeleva
Baikov Institute of Metallurgy and Materials Science
Email: mikheev.roman@mail.ru
Rússia, Moscow, 119334
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science
Email: mikheev.roman@mail.ru
Rússia, Moscow, 119334