Influence of cyclic laser pulses on degradation of a tantalum coating
- Авторлар: Karnavskaya T.G.1, Kikin P.Y.2, Perevezentsev V.N.2,3, Rusin E.E.2
-
Мекемелер:
- Central Research Institute Burevestnik
- Mechanical Engineering Research Institute
- Lobachevsky State University of Nizhny Novgorod
- Шығарылым: Том 8, № 3 (2017)
- Беттер: 382-386
- Бөлім: Effects of Energy Fluxes on Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/206443
- DOI: https://doi.org/10.1134/S2075113317030133
- ID: 206443
Дәйексөз келтіру
Аннотация
The possibility of simulation of pulsed heat exposure on the surface of Ta coating by low-energy cyclic laser irradiation is considered. In is shown that, at a sufficiently small time interval between the laser pulses, the efficiency of laser radiation absorption by the surface is increased permanently owing to the rise in surface temperature and formation of Ta2O5 and Ta2O oxides. This leads to an even greater increase in surface temperature. The laser irradiation regimes resulting in Ta coating degradation and fracture after the action of a large number of laser pulses are ascertained.
Негізгі сөздер
Авторлар туралы
T. Karnavskaya
Central Research Institute Burevestnik
Хат алмасуға жауапты Автор.
Email: karnavskaya.tanya@burevestnik.com
Ресей, Nizhny Novgorod, 603950
P. Kikin
Mechanical Engineering Research Institute
Email: karnavskaya.tanya@burevestnik.com
Ресей, Nizhny Novgorod, 603024
V. Perevezentsev
Mechanical Engineering Research Institute; Lobachevsky State University of Nizhny Novgorod
Email: karnavskaya.tanya@burevestnik.com
Ресей, Nizhny Novgorod, 603024; Nizhny Novgorod, 603098
E. Rusin
Mechanical Engineering Research Institute
Email: karnavskaya.tanya@burevestnik.com
Ресей, Nizhny Novgorod, 603024
Қосымша файлдар
