Email this article Features of Formation of the Structure of Nitrogenous Steel during High Temperature Thermomechanical Treatment
- Authors: Fomina O.V.1, Vikhareva T.V.1, Markova Y.M.1, Gribanova V.B.1
-
Affiliations:
- Central Research Institute of Structural Materials Prometey, National Research Center Kurchatov Institute
- Issue: Vol 10, No 4 (2019)
- Pages: 757-765
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207959
- DOI: https://doi.org/10.1134/S2075113319040129
- ID: 207959
Cite item
Open Access
Access granted
Subscription Access
Abstract
The study of formation of the structure of austenitic nitrogenous steel obtained from physical simulation of the processes of hot deformation with a Gleeble-3800 installation by various modes is considered in the work. The kinetics of metadynamic recrystallization within the interdeformation interval under multipass deformation implemented under different schemes is studied. As a result, it was established that, depending on the deformation scheme, the recrystallization runs with varying degree and intensity.
About the authors
O. V. Fomina
Central Research Institute of Structural Materials Prometey, National Research Center Kurchatov Institute
Author for correspondence.
Email: oknir@crism.ru
Russian Federation, St. Petersburg, 191015
T. V. Vikhareva
Central Research Institute of Structural Materials Prometey, National Research Center Kurchatov Institute
Email: oknir@crism.ru
Russian Federation, St. Petersburg, 191015
Yu. M. Markova
Central Research Institute of Structural Materials Prometey, National Research Center Kurchatov Institute
Email: oknir@crism.ru
Russian Federation, St. Petersburg, 191015
V. B. Gribanova
Central Research Institute of Structural Materials Prometey, National Research Center Kurchatov Institute
Email: oknir@crism.ru
Russian Federation, St. Petersburg, 191015
Supplementary files
