Enviar artigo por via de e-mail Effect of the grain size on accumulation of scalar density of dislocations and its components in low-alloy Cu–Al
- Autores: Koneva N.A.1, Trishkina L.I.1, Cherkasova T.V.1,2, Kozlov E.V.1
-
Afiliações:
- Tomsk State University of Architecture and Building
- Tomsk Polytechnic University
- Edição: Volume 8, Nº 4 (2017)
- Páginas: 566-572
- Seção: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/206642
- DOI: https://doi.org/10.1134/S207511331704013X
- ID: 206642
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The dislocation structure of deformed polycrystal Cu–Al alloys was studied by the TEM method. Measurement and separation of the scalar densities (〈ρ〉) by components were carried out: density (ρG) of the geometrically necessary dislocations (GND) and density (ρS) of the statistically stored dislocations (SSD). Effect of the grain size on the GND and SSD accumulation was established.
Palavras-chave
Sobre autores
N. Koneva
Tomsk State University of Architecture and Building
Autor responsável pela correspondência
Email: koneva@tsuab.ru
Rússia, Tomsk, 634003
L. Trishkina
Tomsk State University of Architecture and Building
Email: koneva@tsuab.ru
Rússia, Tomsk, 634003
T. Cherkasova
Tomsk State University of Architecture and Building; Tomsk Polytechnic University
Email: koneva@tsuab.ru
Rússia, Tomsk, 634003; Tomsk, 634050
E. Kozlov
Tomsk State University of Architecture and Building
Email: koneva@tsuab.ru
Rússia, Tomsk, 634003
Arquivos suplementares
