Deformational snap temper of structural steel
- 作者: Prokhorova A.1, Borisova A.1
-
隶属关系:
- Moscow State University of Mechanical Engineering (MAMI)
- 期: 卷 8, 编号 1-2 (2014)
- 页面: 187-191
- 栏目: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67859
- DOI: https://doi.org/10.17816/2074-0530-67859
- ID: 67859
如何引用文章
全文:
详细
The article presents the results of the influence of temperature and deformation during snap temper of structural steel 38ХН3МФА. It is shown that 300°С and 500°С deformation temperatures of 300 and 500° significantly increases the durability characteristics, but decreases the flexibility. The subsequent after deformation snap temper at a temperature 560°С has a positive effect on the mechanical properties complex.
作者简介
A. Prokhorova
Moscow State University of Mechanical Engineering (MAMI)
Email: kafmaterialy@mail.ru
Ph.D.; +7 (906) 096-48-55
A. Borisova
Moscow State University of Mechanical Engineering (MAMI)
Email: kafmaterialy@mail.ru
+7 (906) 096-48-55
参考
- Металловедение и термическая обработка стали. В 3 т. - М. Т. 2 / Бернштейн М.Л., Рахштадт А.Г.: Металлургия, 1983 - 368 с.
- Современные направления стабилизации прочности и долговечности в машиностроительной продукции / Зинченко В.М., Маневский С.Е., Прохорова А.И.: Технология металлов, 2012. №10 - с. 12 - 18.
- Деформационное упрочнение закаленных конструкционных сталей / Васильева А.Г.: М. Машиностроение, 1981 - 232 с.
- Перераспределение углерода при деформации закаленной конструкционной стали / Корнет Е.В., Иванов Ю.Ф., Коновалов С.В., Громов В.Е.: Фундаментальные проблемы современного материаловедения. 2009. № 1 - с. 101 - 105.
- Закаленная конструкционная сталь: структура и механизмы упрочнения / Иванов Ю.Ф., Корнет Е.В., Громов В.Е.: Новокузнецк. Изд-во СибГИУ, 2010 - 173 с.