Definition of optimum parameters of workpieces and superplastic forming and isothermal stamping operations for the manufacturing of thin-walled details of gas-turbine engines
- Authors: Temis J.M1,2, Khudyakov A.P1, Cherednichenko A.V2
-
Affiliations:
- Central Institute of Aviation Motors
- Bauman Moscow State Technical University
- Issue: Vol 9, No 3-4 (2015)
- Pages: 16-25
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67089
- DOI: https://doi.org/10.17816/2074-0530-67089
- ID: 67089
Cite item
Full Text
Abstract
The technique of mathematical simulation of isothermal stamping and superplastic molding for determination of optimum parameters of work pieces and manufacturing operations is presented. Application of the technique for thinwalled case and hollow vane manufacturing are shown.
Full Text
##article.viewOnOriginalSite##About the authors
J. M Temis
Central Institute of Aviation Motors; Bauman Moscow State Technical University
Email: tejoum@ciam.ru
Dr. Sc, Prof.
A. P Khudyakov
Central Institute of Aviation Motors
A. V Cherednichenko
Bauman Moscow State Technical UniversityPhD
References
- Serra D. Superplastic forming applications on aero engines. A review of ITP manufacturing processes. 6th EUROSPF Conference, Carcassonne, France, 3-5 September, 2008.
- Чумаченко Е.Н., Смирнов О.М., Цепин М.А. Сверхпластичность: материалы, теория, тех- нологии. Изд. 2-е, М.: Книжный дом «ЛИБРОКОМ», 2009. - 320 с.
- Васин Р.А., Еникеев Ф.У. Введение в механику сверхпластичности: В 2 ч. Ч. II. - Уфа: Гилем, 1999. - 626 с.