Enviar artigo por via de e-mail Heat and Recrystallization Processes in Polyethylene–Cyanuric Acid Mixtures after Plastic Deformation under High Pressure
- Autores: Zhorin V.A.1, Kiselev M.R.2, Kotenev V.A.2
-
Afiliações:
- Semenov Institute of Chemical Physics, Russian Academy of Sciences
- Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
- Edição: Volume 55, Nº 2 (2019)
- Páginas: 247-251
- Seção: Physicochemical Processes at the Interfaces
- URL: https://journals.rcsi.science/2070-2051/article/view/204942
- DOI: https://doi.org/10.1134/S2070205119030304
- ID: 204942
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
LDPE and SMPE mixtures with cyanuric acid (40–90 wt %) underwent plastic deformation under 0.5–3.0 GPa and were analyzed with DSC. We found that cold crystallization proceeds during heating the deformed mixtures in LDPE and the enthalpy of melting decreases. Ultrafine crystallites are formed in the mixtures with SMPE, and the enthalpy of melting increases by 1.8 times.
Sobre autores
V. Zhorin
Semenov Institute of Chemical Physics, Russian Academy of Sciences
Autor responsável pela correspondência
Email: vzhorin@mail.ru
Rússia, Moscow, 119991
M. Kiselev
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Email: kisselev@phych.ac.ru
Rússia, Moscow, 117915
V. Kotenev
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Autor responsável pela correspondência
Email: kisselev@phych.ac.ru
Rússia, Moscow, 117915
Arquivos suplementares
