Nanocomposite Protective Coatings Fabricated by Electrostatic Spray Method

Abstract

Nowadays, powder coating can be used for many application, especially for protection against corrosive environments. Powder coating is usually done with using an electrostatic device and spraying gun. With using this method, a thin film layer is created on the surface which can play decorative or protective role. In this paper, the effect of some factors such as size of powder, charging, voltage, air flow, gun distance, charge–to-mass ratio, feed rate, coating functionality, glass transition temperature (T_g), viscosity, catalyst, temperature and curing time on the coating properties and their influence on the coating were mentioned. In recent years, nano composite polymers have been considered severely. Coating properties are improved by adding nanoparticles such as clay, SiO₂, TiO₂ and Al₂O₃ to the polymer composition. These coatings are used for reducing the gas permeability, thermal stability, optical clarity and increasing the mechanical and corrosion properties of coatings also these coatings have high mechanical properties that can be pointed to its high abrasion resistance. In this paper, the corrosion properties and the effect of adding nanoparticles on the corrosion resistance properties of powder coatings have been investigated, also the mechanical properties of powder coatings were reviwed.