Email this article Wear Resistance of Nickel–Phosphorus–Modified Copper Phthalocyanate Composition Coatings
- Authors: Vinokurov E.G.1,2, Zuev K.V.1,3, Zhigunov F.N.1, Perevalov V.P.1
-
Affiliations:
- Mendeleev University of Chemical Technology of Russia
- Frumkin Institute of Physical Chemistry and Electrochemistry
- Topchiev Institute of Petrochemical Synthesis
- Issue: Vol 54, No 1 (2018)
- Pages: 92-94
- Section: New Substances, Materials and Coatings
- URL: https://journals.rcsi.science/2070-2051/article/view/203818
- DOI: https://doi.org/10.1134/S2070205118010136
- ID: 203818
Cite item
Open Access
Access granted
Subscription Access
Abstract
New antifriction composition coatings based on Ni–P alloy and nanodisperse particles of copper phthalocyanate (CuPc) modified with 4-benzenediazonium carboxylate have been prepared and investigated. The effect of the content of carboxylic groups in the disperse phase on the wear resistance of the coatings has been studied, and the optimal concentration of CuPc in the suspension for the autocatalytic deposition of composition coatings has been determined.
About the authors
E. G. Vinokurov
Mendeleev University of Chemical Technology of Russia; Frumkin Institute of Physical Chemistry and Electrochemistry
Author for correspondence.
Email: vin-62@mail.ru
Russian Federation, Moscow, 125047; Moscow, 119071
K. V. Zuev
Mendeleev University of Chemical Technology of Russia; Topchiev Institute of Petrochemical Synthesis
Email: vin-62@mail.ru
Russian Federation, Moscow, 125047; Moscow, 119991
F. N. Zhigunov
Mendeleev University of Chemical Technology of Russia
Email: vin-62@mail.ru
Russian Federation, Moscow, 125047
V. P. Perevalov
Mendeleev University of Chemical Technology of Russia
Email: vin-62@mail.ru
Russian Federation, Moscow, 125047
Supplementary files
