Email this article Numerical simulation of the failure of composite materials by using the grid-characteristic method
- Authors: Beklemysheva K.A.1, Vasyukov A.V.1, Ermakov A.S.1, Petrov I.B.1
-
Affiliations:
- Moscow Physical-Technical Institute
- Issue: Vol 8, No 5 (2016)
- Pages: 557-567
- Section: Article
- URL: https://journals.rcsi.science/2070-0482/article/view/201214
- DOI: https://doi.org/10.1134/S2070048216050033
- ID: 201214
Cite item
Open Access
Access granted
Subscription Access
Abstract
This is an overview of the existing criteria of the failure of the composite materials and of the results of the application of some of them to simulate a low-speed hit on the composition material for the three-dimensional statement of the problem. Simulation is made by means of the grid-characteristic method. Reasons are given for the selection of specific criteria and they are compared with each other.
About the authors
K. A. Beklemysheva
Moscow Physical-Technical Institute
Email: petrov@mipt.ru
Russian Federation, Moscow
A. V. Vasyukov
Moscow Physical-Technical Institute
Email: petrov@mipt.ru
Russian Federation, Moscow
A. S. Ermakov
Moscow Physical-Technical Institute
Email: petrov@mipt.ru
Russian Federation, Moscow
I. B. Petrov
Moscow Physical-Technical Institute
Author for correspondence.
Email: petrov@mipt.ru
Russian Federation, Moscow
Supplementary files
