Analysis for two-component composite coatings in the production of electronic components by computer vision methods

Cover Page

Cite item

Full Text

Abstract

A method for analyzing two-component composite coatings in the production of electronic components is presented, based on a system of mathematically grounded image processing algorithms. This method allows for the determination of the specific surface area, total material area, and contact boundaries, ensuring high accuracy and result stability. The obtained results can be successfully integrated into industrial processes for material quality assessment and production control. Within the scope of the study, an information-measurement image processing system has been developed, minimizing error accumulation at each stage and ensuring high precision in determining material characteristics. Examples of successful method application are presented, highlighting its effectiveness and prospects in various areas, including industrial production of electronic components. The obtained results serve as a basis for further research and refinement of methods for analyzing composite materials.

About the authors

Maksim V. Nenashev

Samara State Technical University

Email: nenashev.mv@samgtu.ru
ORCID iD: 0000-0003-3918-5340
https://www.mathnet.ru/person38904

Dr. Tech. Sci., Professor; First Vice-Rector–Vice-Rector for Scientific Work; University Administration

Russian Federation, 443100, Samara, Molodogvardeyskaya st., 244

Oleg S. Rachmanin

Samara State Technical University

Email: rakhmanin.os@samgtu.ru
ORCID iD: 0000-0001-7337-268X
https://www.mathnet.ru/person204974

Cand. Tech. Sci., Associate Professor; Head of the Laboratory; Lab. of Digital Doubles of Materials and Technological Processes of their Processing

Russian Federation, 443100, Samara, Molodogvardeyskaya st., 244

Victoria V. Kiyashchenko

Samara State Technical University

Author for correspondence.
Email: vv.kiyashchenko@gmail.com
ORCID iD: 0000-0001-9710-2860
https://www.mathnet.ru/person204975

Postgraduate Student; Junior Researcher; Lab. of Digital Doubles of Materials and Technological Processes of their Processing

Russian Federation, 443100, Samara, Molodogvardeyskaya st., 244

References

  1. Nikolaev V. M., Vertianov D. V., Shishov A. M., et al. Review of existing technologies for the formation of microelectronic devices on plastic substrates, In: Sovremennye tendentsii v nauchnoi deiatel’nosti [Modern Trends in Scientific Activity], VII Intern. Sci.-Pract. Conf. (Moscow; 28 December, 2015). Moscow, Sci. Center “Olimp”, 2015, pp. 981–989 (In Russian). EDN: VDXLQZ.
  2. Anisovich A. G. Particularities of metallographic preparation for the analysis of thin layers and coatings. foundry production and metallurgy, Foundry Production and Metallurgy, 2020, no. 2, pp. 59–62 (In Russian). EDN: MPCJQQ. DOI: https://doi.org/10.21122/1683-6065-2020-2-59-62.
  3. Letckovnik A. V., Bryleva O. V., Kabankov A. I., Semicheva L. G. Methodology for preparing microsections for metallographic and micro-X-ray spectral analyzes of metal-polymer compounds, Aktualnye Problemy Aviatsii Kosmonavtiki, 2014, vol. 1, no. 10, pp. 107–108 (In Russian). EDN: PFSCXB.
  4. Padalko V. S., Zryumova A. G., Karelin I. S., Iskusnova N. V. Development of a composite material for creating flexible strain gauge sensors, Polzunovskii Almanakh, 2021, no. 4, pp. 144–145 (In Russian). EDN: RHUGSU.
  5. Novikov A., Novottnik M. Heat-dissipating composite material coating for high temperature electronics, Tekhnologii Elektronnoi Promyshlennosti, 2017, no. 4(96), pp. 48–51 (In Russian). EDN: ZCMRHL.
  6. Tereschenok A., Potapov S. New composite materials for thermoregulation of high-power electronics, Electronics: Science, Technology, Business, 2022, no. 8(219), pp. 62–67 (In Russian). EDN: KMUDKQ. DOI: https://doi.org/10.22184/1992-4178.2022.219.8.62.66.
  7. Terekhova Yu. S., Kiselev D. A., Solnyshkin A. V. Scanning probe microscopic study of P(VDF-TrFE) based ferroelectric nanocomposites, Modern Electronic Materials, 2021, vol. 7, no. 1, pp. 11–16. EDN: EAVYXE. DOI: https://doi.org/10.3897/j.moem.7.1.73283.
  8. Khmyl A. A., Lanin V. L., Emelyanov V. A. Gal’vanicheskie pokrytiia v izdeliiakh elektroniki [Galvanic Coatings in Electronics Products]. Minsk, Integralpoligraf, 2017, 480 pp. (In Russian). EDN: CHSIYS.
  9. Mustafaev G. A., Mustafaeva D. G., Mustafaev M. G. Obtaining of dielectric coatings, uniform by their structure and thickness, during formation of the instrument structures, Nanoand Microsystems Technology, 2017, vol. 19, no. 3, pp. 131–136 (In Russian). EDN: YHXAKZ. DOI: https://doi.org/10.17587/nmst.19.131-136.
  10. Gonzalez R. C., Woods R. E. Digital Image Processing. New York, Pearson Education, 2018, 1019 pp.

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Figure 1. Frequency distribution of the appearance of different intensities for Eq. (1) in the analyzed image

Download (141KB)
3. Figure 2. Analyzed image of the coating obtained by an electron microscope in the .tif format (1280$\times$960 px)

Download (979KB)
4. Figure 3. Image of the coating after the analysis

Download (2MB)

Copyright (c) 2024 Authors; Samara State Technical University (Compilation, Design, and Layout)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).