Experimental evaluation of friction factor and heat transfer enhancement of twisted tape inserts using TiO2–water nanofluids


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

This paper studies the experimental evaluation of TiO2 nanofluids in enhancing the heat transfer rate and friction factor on a micro-finned tube fitted with twisted tape inserts. Results show that the enhancement in heat transfer and pumping power completely depends on the concentration ratio of nanoparticles, pitch ratio and the type of pitch. Comparisons were made with the previous study with different operating parameters such as twist ratio and twist type. Viscosity of nanofluid increases with an increase in the concentration, which leads to increased pressure drop and pumping power. For the Reynolds number (Re = 4000), the maximum performance ratio was found as 2.1, 2, for concentration of 0.1 and 0.05, respectively. The addition of microfin arrangement inside the circular tube enhanced the performance ratio with minimum concentration of TiO2 nanofluid.

作者简介

D. Magesh Babu

Department of Mechanical Engineering; Centre for Excellence in Energy and Nano Technology

编辑信件的主要联系方式.
Email: mageshbabu@saec.ac.in
印度, Chennai; Chennai

P. Nagarajan

Department of Mechanical Engineering; Centre for Excellence in Energy and Nano Technology

Email: mageshbabu@saec.ac.in
印度, Chennai; Chennai

B. Madhu

Department of Mechanical Engineering; Centre for Excellence in Energy and Nano Technology

Email: mageshbabu@saec.ac.in
印度, Chennai; Chennai

S. Ravishankar

Department of Mechanical Engineering; Centre for Excellence in Energy and Nano Technology

Email: mageshbabu@saec.ac.in
印度, Chennai; Chennai

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2017