Laser profilometry and scanning electron microscopy to study the surface structure of dental casting alloys of noble and precious metals
- Authors: Garazha SN1, Domenyuk DA1, Ivancheva Y.N1
-
Affiliations:
- Ставропольская государственная медицинская академия
- Issue: Vol 14, No 3 (2010)
- Pages: 9-12
- Section: Articles
- URL: https://journals.rcsi.science/1728-2802/article/view/38743
- DOI: https://doi.org/10.17816/dent.38743
- ID: 38743
Cite item
Full Text
Abstract
Using laser profilometry and scanning electron microscopy combined with electron magnetic resonance imaging, the authors studied the microstructure of the surface of dental casting alloys of noble (Selector 3 (Metalor), Palliag MJ (Degussa), Solaro 3 (Metalor), Superpal (Russia), Plagodent (Russia) and precious (Palliag W (Degussa), Mattident P (Johnson Matthey) metals. The results were compared with the parameters of natural tooth enamel surface.
According to the study, the microstructure and microrelief of the surface of Plagodent (Russia), a superhard gold-platinum alloy with a high gold content, is closest to parameters of natural tooth enamel. Significant structural homogenicity, high density, and high surface purity together with no open porosity reduce the probability of the aggregation of oral fluid microbial and chemical agents on the material surface, which is a predictor of high efficacy of orthopedic treatment.
According to the study, the microstructure and microrelief of the surface of Plagodent (Russia), a superhard gold-platinum alloy with a high gold content, is closest to parameters of natural tooth enamel. Significant structural homogenicity, high density, and high surface purity together with no open porosity reduce the probability of the aggregation of oral fluid microbial and chemical agents on the material surface, which is a predictor of high efficacy of orthopedic treatment.
Keywords
About the authors
S N Garazha
Ставропольская государственная медицинская академияКафедра ортопедической стоматологии; Ставропольская государственная медицинская академия
D A Domenyuk
Ставропольская государственная медицинская академия
Email: litvinala@mail.ru
Кафедра ортопедической стоматологииканд. мед. наук, докторант каф. ортопедической стоматологии; Ставропольская государственная медицинская академия
Ye N Ivancheva
References
- Доменюк Д. А. Профилактика побочного действия металлокерамических зубных протезов: Автореф. дис. ... канд. мед. наук. - М., 2006.
- Колесов С. Материаловедение и технология конструкционных материалов. - М., 2004.
- Леинфельдер К. Ц. // Квинтэссенция. - 1996. - № 3. - С. 49-62.
- Рубежов А. Л. Состояние тканей пародонта в зависимости от качества зубных протезов и гигиены полости рта: Автореф. дис. ... канд. мед. наук. - СПб., 1998.
- Трезубов В. Н. Ортопедическая стоматология. Прикладное материаловедение. - СПб., 1999.
- Asgar K. // J. Dent. Res. - 2004. - Vol. 2. - P. 33.
- Cunningham D. M. // J. Dent. Clin. North. Am. - 2003. - Vol. 17. - P. 790.
- Landesmann H. M. // J. Prosthet. Dent. - 2004. - Vol. 46. - P. 161-168.
- Russel M. M. // Quintess. Intern. - 2005. - Vol. 26. - P. 757-778.