Email this article Investigation of the Effectiveness of Metal Bulwarks with “Cam in Iron Ring” Joints
- Authors: Korchagin E.A.1, Kuznetsova V.N.1
-
Affiliations:
- National Research Moscow State University of Civil Engineering
- Issue: Vol 53, No 2 (2019)
- Pages: 135-140
- Section: Article
- URL: https://journals.rcsi.science/1570-145X/article/view/246421
- DOI: https://doi.org/10.1007/s10749-019-01050-8
- ID: 246421
Cite item
Open Access
Access granted
Subscription Access
Abstract
Resistance in sheet piling joints during pile driving affects the quality of performance of the work. The probable resistance forces in of the “cam in iron ring” joint type were studied on the basis of analysis of the operating set of documentation and of tests.
Keywords
About the authors
E. A. Korchagin
National Research Moscow State University of Civil Engineering
Author for correspondence.
Email: expert.korchagin@mail.ru
Russian Federation, Moscow
V. N. Kuznetsova
National Research Moscow State University of Civil Engineering
Email: expert.korchagin@mail.ru
Russian Federation, Moscow
