Email this article Determining the Equivalent Sand Roughness of a Surface by Measuring the Hydraulic Resistance of an Annular Channel
- Authors: Korsun A.S.1, Pisarevskii M.I.1, Fedoseev V.N.1, Delov M.I.1
-
Affiliations:
- National Research Nuclear University, Moscow Engineering Physics Institute
- Issue: Vol 51, No 2 (2017)
- Pages: 151-155
- Section: Article
- URL: https://journals.rcsi.science/1570-145X/article/view/245676
- DOI: https://doi.org/10.1007/s10749-017-0801-4
- ID: 245676
Cite item
Open Access
Access granted
Subscription Access
Abstract
A new method is proposed for determining equivalent sand roughness from data for measurements of the hydraulic resistance of an annular channel. The channel is formed by a smooth pipe into which a rod with surface roughness is inserted coaxially. The equivalent sand roughness is also determined for this roughness and is applied in calculations for various hydraulic channels. Results confirming the feasibility of this method are presented.
About the authors
A. S. Korsun
National Research Nuclear University, Moscow Engineering Physics Institute
Author for correspondence.
Email: peace579@mail.ru
Russian Federation, Moscow
M. I. Pisarevskii
National Research Nuclear University, Moscow Engineering Physics Institute
Email: peace579@mail.ru
Russian Federation, Moscow
V. N. Fedoseev
National Research Nuclear University, Moscow Engineering Physics Institute
Email: peace579@mail.ru
Russian Federation, Moscow
M. I. Delov
National Research Nuclear University, Moscow Engineering Physics Institute
Email: peace579@mail.ru
Russian Federation, Moscow
