Email this article Noise Barriers for Power-Plant Equipment
- Authors: Tupov V.B.1, Semin S.A.1, Tupov B.V.1, Taratornin A.A.1, Rozanov D.A.1
-
Affiliations:
- National Research University “Moscow Power Engineering Institute”
- Issue: Vol 50, No 6 (2017)
- Pages: 649-652
- Section: Article
- URL: https://journals.rcsi.science/1570-145X/article/view/245522
- DOI: https://doi.org/10.1007/s10749-017-0767-2
- ID: 245522
Cite item
Open Access
Access granted
Subscription Access
Abstract
Noise barriers are an effective method of mitigating the noise made by various equipment. Factors influencing the acoustic efficiency of noise barriers such as height, sound-absorbing material, slanted top, and position relative to the noise source are considered. The experience of using noise barriers for cooling towers, transformers, gas-distribution plants, ventilation systems, and air inlets and casings of compressors is described.
About the authors
V. B. Tupov
National Research University “Moscow Power Engineering Institute”
Author for correspondence.
Email: tupovvb@mpei.ru
Russian Federation, Moscow
S. A. Semin
National Research University “Moscow Power Engineering Institute”
Email: tupovvb@mpei.ru
Russian Federation, Moscow
B. V. Tupov
National Research University “Moscow Power Engineering Institute”
Email: tupovvb@mpei.ru
Russian Federation, Moscow
A. A. Taratornin
National Research University “Moscow Power Engineering Institute”
Email: tupovvb@mpei.ru
Russian Federation, Moscow
D. A. Rozanov
National Research University “Moscow Power Engineering Institute”
Email: tupovvb@mpei.ru
Russian Federation, Moscow
Supplementary files
