High-Pressure Deaerator for 300-MW Power Generating Units
- Authors: Egorov P.V.1, Gimmel’berg A.S.1, Mikhailov V.G.1, Chuprakov M.V.1, Baeva A.N.1
-
Affiliations:
- JSC “NPO TsKTI”
- Issue: Vol 50, No 2 (2016)
- Pages: 188-191
- Section: Article
- URL: https://journals.rcsi.science/1570-145X/article/view/245145
- DOI: https://doi.org/10.1007/s10749-016-0681-z
- ID: 245145
Cite item
Abstract
Thermal high-pressure deaerators with a capacity of 1000 tons/h have been developed and installed at the Kostroma State Regional Power Plant and the Wang-Bi Thermal Power Plant in Vietnam. The deaerators can be constructed with a vertical or horizontal deaeration column installed on a deaerator tank with the required volume. Based on this positive operating experience, it is appropriate to develop proposals for the composition and design of a commercial feed-water deaerator with a capacity of 1000 tons/h for use in 200 – 300-MW power generating units.
About the authors
P. V. Egorov
JSC “NPO TsKTI”
Author for correspondence.
Email: deaerator@ckti.ru
Russian Federation, St. Petersburg
A. S. Gimmel’berg
JSC “NPO TsKTI”
Email: deaerator@ckti.ru
Russian Federation, St. Petersburg
V. G. Mikhailov
JSC “NPO TsKTI”
Email: deaerator@ckti.ru
Russian Federation, St. Petersburg
M. V. Chuprakov
JSC “NPO TsKTI”
Email: deaerator@ckti.ru
Russian Federation, St. Petersburg
A. N. Baeva
JSC “NPO TsKTI”
Email: deaerator@ckti.ru
Russian Federation, St. Petersburg