Cold spray deposition of aluminum coating onto an erodible material
- Autores: Shikalov V.1, Klinkov S.1, Kosarev V.1
-
Afiliações:
- Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
- Edição: Volume 26, Nº 5 (2019)
- Páginas: 729-737
- Seção: Article
- URL: https://journals.rcsi.science/1531-8699/article/view/218669
- DOI: https://doi.org/10.1134/S086986431905010X
- ID: 218669
Citar
Resumo
Results of a pioneering experimental study of the cold spray method used for spraying aluminum traces onto the surface of a brittle erodible material (like brick) are reported. The spraying is performed using a sonic nozzle. Particle velocities near the axis of the two-phase jet are measured, and an approximating formula is derived to describe the dependence of the particle velocity on the stagnation pressure and temperature of the accelerating air. Interaction of the two-phase jet with the substrate surface is studied, and it is shown that an increase in the gas stagnation temperature transforms the process of substrate erosion a coating formation process. Parameter values that can be recommended as working ones for practical spraying are identified.
Palavras-chave
Sobre autores
V. Shikalov
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
Email: vkos@itam.nsc.ru
Rússia, Novosibirsk
S. Klinkov
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
Email: vkos@itam.nsc.ru
Rússia, Novosibirsk
V. Kosarev
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
Autor responsável pela correspondência
Email: vkos@itam.nsc.ru
Rússia, Novosibirsk