Отправить статью по E-mail Application of local indentations for film cooling of gas turbine blade leading edge
- Авторы: Petelchyts V.Y.1, Khalatov A.A.2,3, Pysmennyi D.N.1, Dashevskyy Y.Y.1
-
Учреждения:
- Gas Turbine Research and Production Complex «Zorya»-«Mashproekt»
- Institute of Engineering Thermophysics
- National Technical University of Ukraine «I. Sikorskiy Kyiv Polytechnic Institute»
- Выпуск: Том 23, № 5 (2016)
- Страницы: 713-720
- Раздел: Article
- URL: https://journals.rcsi.science/1531-8699/article/view/216639
- DOI: https://doi.org/10.1134/S0869864316050097
- ID: 216639
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
The paper presents results of computer simulation of the film cooling on the turbine blade leading edge model where the air coolant is supplied through radial holes and row of cylindrical inclined holes placed inside hemispherical dimples or trench. The blowing factor was varied from 0.5 to 2.0. The model size and key initial parameters for simulation were taken as for a real blade of a high-pressure high-performance gas turbine. Simulation was performed using commercial software code ANSYS CFX. The simulation results were compared with reference variant (no dimples or trench) both for the leading edge area and for the flat plate downstream of the leading edge.
Ключевые слова
Об авторах
V. Petelchyts
Gas Turbine Research and Production Complex «Zorya»-«Mashproekt»
Автор, ответственный за переписку.
Email: vypete@e-mail.ua
Украина, Mykolaiv
A. Khalatov
Institute of Engineering Thermophysics; National Technical University of Ukraine «I. Sikorskiy Kyiv Polytechnic Institute»
Email: vypete@e-mail.ua
Украина, Kyiv; Kyiv
D. Pysmennyi
Gas Turbine Research and Production Complex «Zorya»-«Mashproekt»
Email: vypete@e-mail.ua
Украина, Mykolaiv
Yu. Dashevskyy
Gas Turbine Research and Production Complex «Zorya»-«Mashproekt»
Email: vypete@e-mail.ua
Украина, Mykolaiv
Дополнительные файлы
