On injection of hydrate-forming gas into a gas-saturated snowy agglomerate while transition through the ice melting point
- Авторлар: Shagapov V.1,2, Chiglintseva A.1,3
-
Мекемелер:
- Kazan Federal Research Center
- Mavlyutov Institute of Mechanics
- Bashkir State University, Birsk Branch
- Шығарылым: Том 25, № 1 (2018)
- Беттер: 85-99
- Бөлім: Article
- URL: https://journals.rcsi.science/1531-8699/article/view/217296
- DOI: https://doi.org/10.1134/S0869864318010080
- ID: 217296
Дәйексөз келтіру
Аннотация
The paper considers the process of injection of hydrate-forming gas (methane) into a snowy agglomerate (ini-tially saturated with methane). The self-similar problem statement demonstrates that if the warm gas (Te > 0 °C) is injected under a high pressure (pe ≥ p*, where the critical values are found from the initial temperature T0, pressure p0, volumetric snow saturation Si0, and permeability of snow) into the filtration zone with phase transition, this produces four characteristic zones: the nearest zone with all snow transformed into hydrate, therefore, the aggregate filled only with gas and hydrate, the two intermediate zones where gas, snow or water and hydrate are in phase equilibrium state, and the distant zone filled only with gas and snow. The obtained analytical and numerical solutions give an analysis of the influence of key input parameters like initial state of the aggregate, gas injection rate, and its temperature, on the structure and the length of four filtration zones.
Авторлар туралы
V. Shagapov
Kazan Federal Research Center; Mavlyutov Institute of Mechanics
Хат алмасуға жауапты Автор.
Email: changelina@rambler.ru
Ресей, Kazan; Ufa
A. Chiglintseva
Kazan Federal Research Center; Bashkir State University, Birsk Branch
Email: changelina@rambler.ru
Ресей, Kazan; Birsk