Experimental and Theoretical Studies of the Mechanical Properties of 3D Printed Polyamide Products of the Schwarz Primitive Topology
- Autores: Arsentev M.Y.1, Balabanov S.V.1, Makogon A.I.1, Sychev M.M.1,2
-
Afiliações:
- Institute of Silicate Chemistry, Russian Academy of Sciences
- St. Petersburg State Institute of Technology (Technical University)
- Edição: Volume 45, Nº 6 (2019)
- Páginas: 599-602
- Seção: Short Communication
- URL: https://journals.rcsi.science/1087-6596/article/view/217776
- DOI: https://doi.org/10.1134/S1087659619060026
- ID: 217776
Citar
Resumo
Polyamide-12 products based on the Schwarz primitive topology with different values of parameter t are created by 3D printing. The samples are obtained by selective laser sintering using an EOS 3D printer. The experimental stress–strain curves are obtained. It is revealed that as parameter t increases the strength of the samples decreases. Computer simulation using the COMSOL Multiphysics software is performed.
Sobre autores
M. Arsentev
Institute of Silicate Chemistry, Russian Academy of Sciences
Autor responsável pela correspondência
Email: ars21031960@gmail.com
Rússia, St. Petersburg, 199034
S. Balabanov
Institute of Silicate Chemistry, Russian Academy of Sciences
Email: ars21031960@gmail.com
Rússia, St. Petersburg, 199034
A. Makogon
Institute of Silicate Chemistry, Russian Academy of Sciences
Email: ars21031960@gmail.com
Rússia, St. Petersburg, 199034
M. Sychev
Institute of Silicate Chemistry, Russian Academy of Sciences; St. Petersburg State Institute of Technology (Technical University)
Email: ars21031960@gmail.com
Rússia, St. Petersburg, 199034; St. Petersburg, 190013
Arquivos suplementares
