Comparative Analysis of the Properties of ZrO2–SiO2 and ZrO2–Al2O3–SiO2 Composition Fiber Composite Materials


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

Strength, morphology, and phase composition are analyzed for a ceramic composite system based on fibers of tetragonal ZrO2 and a matrix with different content of SiO2 and Al2O3. It is shown that with an Al2O3 content from 0 to 20 wt.% there is formation of a precipitation-hardened structure and an increase in material ultimate strength in bending. The reduction in strength with a further increase in Al2O3 content is due to a deficiency in SiO2 binder and inadequate Al2O3 and mullite particle sintering with each other. Features of the structure and phase composition are demonstrated for a composite based on ZrO2 fibers with a different Al2O3:SiO2 ratio in the matrix.

Об авторах

Yu. Balinova

FGUP All-Russia Institute of Aviation Materials GNTs RF

Автор, ответственный за переписку.
Email: zoltech@yandex.ru
Россия, Moscow

N. Buchilin

FGUP All-Russia Institute of Aviation Materials GNTs RF

Email: zoltech@yandex.ru
Россия, Moscow

V. Babashov

FGUP All-Russia Institute of Aviation Materials GNTs RF

Email: zoltech@yandex.ru
Россия, Moscow

Дополнительные файлы

Доп. файлы
Действие
1. JATS XML

© Springer Science+Business Media, LLC, part of Springer Nature, 2018

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).