| Issue |
Title |
File |
| Vol 90, No 2 (2017) |
Copolymers based on (p-vinylphenyl)cyclopropylmethyl chlorocinnamate and methyl methacrylate |
(Eng)
|
|
Guliyev K.G., Aliyeva A.M., Ponomareva G.Z., Sadygova A.I., Mamedli S.B., Guliyev A.M.
|
| Vol 90, No 2 (2017) |
Controlling the properties of epoxy composites filled with brick dust |
(Eng)
|
|
Mostovoi A.S., Kurbatova E.A.
|
| Vol 90, No 1 (2017) |
Copolymerization of 1,3-butadiene and styrene in the presence of an initiating system based on n-butyllithium, amine-containing modifier, and 2,2'-ditetrahydrofurylpropane |
(Eng)
|
|
Vagizov A.M., Khusainova G.R., Akhmetov I.G., Sakhabutdinov A.G.
|
| Vol 90, No 1 (2017) |
Effect of nanosized carbon fillers on the hydrolytic stability of films of a heat-resistant aromatic polyimide |
(Eng)
|
|
Bykova E.N., Gofman I.V.
|
| Vol 90, No 1 (2017) |
Coordination radical polymerization of methyl methacrylate, initiated by the azobis(isobutyronitrile)–tri-n-butylborane binary system |
(Eng)
|
|
Dodonov V.A., Starostina T.I., Kuropatov V.A., Malysheva Y.B., Kuznetsova Y.L., Buzina A.S.
|
| Vol 89, No 12 (2016) |
L-lactide ring-opening polymerization on a magnesium catalyst based on acenaphthene-1,2-diimine ligand: Development of biocompatible materials for osteoplasty |
(Eng)
|
|
Morozov A.G., Fedyushkin I.L., Aleinik D.Y.
|
| Vol 89, No 12 (2016) |
Network polymers based on tetrazolylethyl cellulose ether |
(Eng)
|
|
Kizhnyaev V.N., Zhitov R.G., Krakhotkina E.A., Pokatilov F.A.
|
| Vol 89, No 11 (2016) |
Effect of alkanolamines on properties of epoxy–anhydride compounds |
(Eng)
|
|
Rogozhina L.G., Kuz’min M.V., Ignat’ev V.A., Kolyamshin O.A., Kol’tsov N.I.
|
| Vol 89, No 10 (2016) |
Highly heat-resistant poly(о-hydroxy amide) binders of polyfunctional composites for microelectronics |
(Eng)
|
|
Lebedeva G.K., Bazhenova A.S., Rudaya L.I., Gofman I.V., Marfichev A.Y., Bol’shakov M.N., Sokolova I.M., Chigirev D.S., Ramsh S.M., Shamanin V.V.
|
| Vol 89, No 10 (2016) |
Properties of modified polymers based on syndiotactic 1,2-polybutadiene |
(Eng)
|
|
Glazyrin A.B., Abdullin M.I.
|
| Vol 89, No 10 (2016) |
Effect of mechanical treatment on the aggregative stability of latex and on consumption of coagulants in rubber recovery |
(Eng)
|
|
Verezhnikov V.N., Nikulin S.S., Zorina A.V., Ermolaeva A.K., Kretinina N.I.
|
| Vol 89, No 10 (2016) |
Influence of conditions for preparing butyl acrylate–vinyl butyl ether copolymers using the compensation procedure on their molecular-mass parameters and thickening power in dioctyl sebacate |
(Eng)
|
|
Semenycheva L.L., Valetova N.B., Moikin A.A., Pegeev N.L., Matkivskaya Y.O., Kurskii Y.A.
|
| Vol 89, No 9 (2016) |
Thermal degradation of epoxy composites based on thermally expanded graphite and multiwalled carbon nanotubes |
(Eng)
|
|
Berdyugina I.S., Steksova Y.P., Shibaev A.A., Maksimovskii E.A., Bannov A.G.
|
| Vol 89, No 9 (2016) |
Potential of thermal analysis as applied to studying the kinetics of thermal degradation of polymers |
(Eng)
|
|
Koptelov A.A., Koptelov I.A., Rogozina A.A., Yushkov E.S.
|
| Vol 89, No 9 (2016) |
Preparation of polymer nanoparticles by self-assembling of amphiphilic poly-N-vinylpyrrolidone derivatives in aqueous media |
(Eng)
|
|
Kuskov A.N., Kulikov P.P., Luss A.L., Goryachaya A.V., Shtil’man M.I.
|
| Vol 89, No 9 (2016) |
Technology of liquid-phase compounding of ultra-high-molecular-weight polyethylene with nanoparticles of inorganic compounds under the action of ultrasonic vibrations |
(Eng)
|
|
Okhlopkova T.A., Borisova R.V., Nikiforov L.A., Spiridonov A.M., Sharin P.P., Okhlopkova A.A.
|
| Vol 89, No 9 (2016) |
Effectively Rifampicin loaded microspheres based on blends of high- and low-molecular-mass polylactic acid |
(Eng)
|
|
Salmani H., Bilibin A.Y.
|
| Vol 89, No 9 (2016) |
Polymer-analogous transformations of polyvinyl alcohol |
(Eng)
|
|
Eritsyan M.L., Karamyan R.A., Sumbulyan A.G., Petrosyan G.S., Eritsyan L.N.
|
| Vol 89, No 9 (2016) |
Polymerization of carboxyl-containing bicyclic (meth)acrylates |
(Eng)
|
|
Mamedov M.K., Qedirli V.S.
|
| Vol 89, No 9 (2016) |
Reduction of the hydrodynamic resistance to turbulent water flow with copolymers of acrylamide, acrylonitrile, and 2-acrylamido-2-methylpropanesulfonic acid |
(Eng)
|
|
Nechaev A.I., Lebedeva I.I., Vasil’eva O.G., Chashchukhin A.S., Val’tsifer V.A.
|
| Vol 89, No 8 (2016) |
Synthesis of hemocompatible materials based on branched polyvinyl alcohol |
(Eng)
|
|
Semenova M.V., Osadchenko S.V., Mezhuev Y.O., Shtil’man M.I., Semenova I.N.
|
| Vol 89, No 8 (2016) |
Biopolymer composites based on modified lignin and nanocellulose |
(Eng)
|
|
Ivanov V.F., Gordon D.A., Shilova I.A., Lesnichaya V.A., Mikhailov A.I., Misochko E.Y.
|
| Vol 89, No 8 (2016) |
Influence of the composition of acrylamide–acrylonitrile–2-acrylamido-2-methylpropanesulfonic acid terpolymer on its resistance to high temperatures and salts |
(Eng)
|
|
Nechaev A.I., Lebedeva I.I., Val’tsifer V.A., Strel’nikov V.N.
|
| Vol 89, No 8 (2016) |
Influence of the properties of modified dextran hydrogel polymer network on the kinetics of the release of prospidin antitumor agent |
(Eng)
|
|
Solomevich S.O., Bychkovskii P.M., Yurkshtovich T.L., Golub N.V.
|
| Vol 89, No 8 (2016) |
Effect of functionalized multiwalled carbon nanotubes on the feasibility of fabrication of composite glass fiber reinforced plastic rebars |
(Eng)
|
|
Kazakov I.A., Krasnovskii A.N.
|
| 151 - 175 of 202 Items |
<< < 2 3 4 5 6 7 8 9 > >>
|
