Production of Composite Materials from Peat and Wood by Explosive Autohydrolysis


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Technology for obtaining peat and peat-wood composite materials by the explosive autohydrolysis method without using synthetic binders was developed. The optimal conditions of an explosive autohydrolysis of peat and peat in the presence of wood were found: pressure 1.62 MPa, temperature 210°C, treatment duration of 10 min in an explosive autohydrolysis reactor. Peat and peat-wood composite materials were obtained. In their strength characteristics (bending strength up to 14.68 MPa) and heat conductivity these materials compare well with the conventional heat-insulating materials and can be used as construction materials.

Sobre autores

M. Efanov

Small Innovative Enterprise Yugra-Biotechnologies OOO

Autor responsável pela correspondência
Email: efanov_1973@mail.ru
Rússia, Khanty-Mansiisk, Khanty-Mansi Autonomous region, 628006

V. Kon’shin

Small Innovative Enterprise Yugra-Biotechnologies OOO

Email: efanov_1973@mail.ru
Rússia, Khanty-Mansiisk, Khanty-Mansi Autonomous region, 628006

A. Sinitsyn

Small Innovative Enterprise Yugra-Biotechnologies OOO

Email: efanov_1973@mail.ru
Rússia, Khanty-Mansiisk, Khanty-Mansi Autonomous region, 628006

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2019