The Effect of Tackifier on the Properties of Pressure-Sensitive Adhesives Based on Styrene–Butadiene–Styrene Rubber

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Pressure-sensitive polymer adhesives based on styrene–butadiene–styrene rubbers and aromatic petroleum hydrocarbon resins making the block copolymer tacky and differing in the degree of hydrogenation were prepared. The rheology of the resins and blends was studied in detail, and the adhesion characteristics of the blends were determined. Both the initial components and their blends are characterized by microphase segregation determining the set of the properties. The relationship between the rheology of blends and the character of the cleavage of the adhesive joints was demonstrated.

作者简介

S. Ilyin

Topchiev Institute of Petrochemical Synthesis

编辑信件的主要联系方式.
Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

A. Kostyuk

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

V. Ignatenko

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

N. Smirnova

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

O. Alekseeva

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

N. Petrukhina

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

S. Antonov

Topchiev Institute of Petrochemical Synthesis

Email: s.o.ilyin@gmail.com
俄罗斯联邦, Moscow, 119991

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2018